1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. ME1004-R
    5. /
  5. 5
Page 21 / 98 Scroll up to view Page 16 - 20
17
2
1
3
4
5
6
section
Connecting and Configuring your Router
7
8
9
10
Step 2
Set up the Hardware
The Wizard will walk you through connecting your Router to your
computer and modem. Follow the steps on the screen using the pictures
as a guide.
2.1
This step instructs you to locate
the cable connected between
your modem and the networking
port on your computer. Unplug
this cable from the computer
and plug it into the GREEN
port on the Router. Click “Next”
to continue.
2.2
This step instructs you to locate
the BLUE cable that is included
with your Router. Plug one end
of this cable into ANY one of
the BLUE ports on your Router.
Plug the other end of the cable
into the networking port on your
computer. Click “Next”
to continue.
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 98
Connecting and Configuring your Router
18
2.3
This step instructs you to
locate the power supply that
is included with your Router.
Plug the power supply’s small
connector into the power port
on the Router. Plug the power
supply into an empty power
outlet. Click “Next” to continue.
2.4
This step instructs you to look
at the lights on the front of
your Router. Make sure the
appropriate lights are ON.
Refer to the Quick Installation
Software on your computer’s
screen for more details. Click
“Next” to continue. Note: The
Quick Installation Software
may ask you to reboot your
computer. If it does, reboot
your computer and proceed
with the installation.
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 98
19
2
1
3
4
5
6
section
Connecting and Configuring your Router
7
8
9
10
Step 3
Check the Connection
3.1
Once you have completed
connecting the Router, the Wizard
will check the connection to
the Router and then go on to
determine what type of Internet
connection you have.
3.2
User Name and
Password Needed
If you have a connection type
that requires a user name and a
password, the Wizard will ask
you to type in your user name
and password. If your connection
type does not require a user name
and password, you will not see
this screen.
Your user name and password is
provided to you by your Internet
Service Provider. If you have to type
in a user name and password to
connect to the Internet, then type
that same user name and password
in here. Your user name looks
something like “[email protected]”
or simply “jsmith”. The service
name is optional and is very rarely
required by your ISP. If you don’t
know your service name, leave this
blank. When you have entered your
information, click “Next” to
move on.
3.3
Wireless Setup
This step is optional. Click “Next”
if you want to skip it. Using this
step, you can customize your
wireless network settings if you
want to. Follow the steps on the
screen to complete this step. Click
“Next” to continue.
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 98
Connecting and Configuring your Router
20
Step 4
Secure your Network
4.1
After connection has been
established, you will be
prompted by the Quick
Installation Software to select
your desired security level.
4.2
WEP and WPA are the two
security options. If you do not
want security or would prefer to
install at a later time, click the
radio button next to “NONE”
and click “Next.”
4.3
The Wi-Fi Protected Access
(WPA) security option features
a two-password setup. You
can select one password that
provides COMPLETE NETWORK
access and another password
for GUEST (Internet only)
access only. Click “Next”.
4.4
Security setup is now complete.
Click “Next” to configure.
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 98
21
2
1
3
4
5
6
section
Connecting and Configuring your Router
7
8
9
10
Step 5
Configure the Router
The Wizard will now transfer all of
the configuration information to the
Router. This will take approximately
one minute. During this time, do not
turn off the Router or computer. The
Router will restart itself at the end of
this step.
5.1
Checking Internet
The Wizard will now check
for an Internet connection.
This can take a few minutes.
The Wizard may not detect a
connection right away. If not,
it will retry a number of times.
The “Connected” light on the
front panel of the Router will
flash during this time. Please be
patient through this process.
5.2
Finished
When the Internet connection
is complete, the Wizard will tell
you
that you are finished. The
“Connected” LED on the front of
the Router will be solid GREEN,
indicating that the Router is
now connected to the Internet.
Your Router is now connected to the Internet. Now you can begin surfing
the Internet by opening your browser and going to your favorite web page.
Congratulations.
You have finished installing your new MyEssentials
Router. You are ready to set up the other computers in your home. You
can also add computers to your Router anytime you want.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top