1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. FSD7230-4
    5. /
  5. 4
Page 16 / 112 Scroll up to view Page 11 - 15
14
Connecting and Configuring your Router
Verify the contents of your box. You should have the following:
•
Belkin Wireless G Router
•
Quick Installation Guide
•
Belkin Easy Install Wizard Software CD with User Manual
•
RJ45 Ethernet Networking Cable (for connection of the
Router to the computer)
•
Power Supply
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port. Many modems have both an RJ45 Ethernet port and a USB
connection. If you have a modem with both Ethernet and USB, and
are using the USB connection at this time, you will be instructed to
use the RJ45 Ethernet port during the installation procedure. If your
modem has only a USB port, you can request a different type of
modem from your ISP, or you can, in some cases, purchase a modem
that has an RJ45 Ethernet port on it.
ALWAYS INSTALL YOUR ROUTER FIRST!
IF YOU ARE INSTALLING
NUMEROUS NETWORK DEVICES FOR THE FIRST TIME, IT IS
IMPORTANT THAT YOUR ROUTER IS CONNECTED AND RUNNING
BEFORE ATTEMPTING TO INSTALL OTHER NETWORK COMPONENTS
SUCH AS NOTEBOOK CARDS AND DESKTOP CARDS.
Easy Install Wizard
Belkin has provided our Easy Install Wizard software to make
installing your Router a simple and easy task. You can use it to get
your Router up and running in minutes.
The Easy Install Wizard requires that your Windows 98SE, Me, 2000,
XP, or Mac OS 9.2x or X v10.x computer be connected directly to
your cable or DSL modem and that the Internet connection is active
and working at the time of installation. If it is not, you must use the
Ethernet
USB
Page 17 / 112
Connecting and Configuring your Router
15
section
2
1
3
4
5
6
7
8
9
10
“Alternate Setup Method” section of this User Manual to configure
your Router. Additionally, if you are using an operating system other
than Windows 98SE, Me, 2000, or XP, you must set up the Router
using the “Alternate Setup Method” section of this
User Manual.
IMPORTANT:
Run the Easy Install Wizard software from the
computer that is directly connected to the cable or DSL modem.
DO NOT CONNECT THE ROUTER AT THIS TIME.
Step 1
Run the Easy Install Wizard Software
1.1.
Shut down any programs that are running on your computer at
this time.
1.2
Make sure you have the following items at the computer that is
now directly connected to the cable or DSL modem. DO NOT
CONNECT THE ROUTER AT THIS TIME.
• Quick Installation Guide
• The Easy Install Wizard Software CD with User Manual
• The Router
• The Router’s Power Supply
• RJ45 Ethernet Networking Cable
1.3
Turn off any firewall or Internet-connection-sharing software on
your computer.
1.4
Insert the Easy Install Wizard software CD into your CD-ROM
drive. The Easy Installation Wizard screen will automatically
appear on your screen within 15 seconds. If it does not, select
your CD-ROM drive from “My Computer” and double-click on the
file named “EasyInstall.exe” on the CD-ROM.
Page 18 / 112
16
Connecting and Configuring your Router
Welcome Screen
After you insert the CD into your
CD-ROM drive, the Wizard’s welcome
screen will appear. Make sure you have
not connected the Router at this point.
If you have connected your Router,
please reconnect your computer directly
to the modem. Click “Run the Easy
Install Wizard” when you are ready to
move on.
Progress Screen
The Easy Install Wizard will show you
a progress screen each time a step in
the setup has been completed. Each
time you see the progress screen, click
“Next” when you are ready to move to
the next step.
Examining Settings
The Wizard will now examine your
computer’s network settings and gather
information needed to complete the
Router’s connection to the Internet.
When the Wizard is finished examining
your computer, click “Next” to continue.
Multiple Network Adapters Found
Screen
If you have more than one network
adapter installed in your computer, this
screen will appear. If you have more
than one network adapter installed in
your computer, the Wizard will need
to know which adapter is connected
to your modem. Select the network
adapter that is connected to your
modem from the list and click “Next”.
Page 19 / 112
Connecting and Configuring your Router
17
section
2
1
3
4
5
6
7
8
9
10
Step 2
Set up the Hardware
The Wizard will walk you through connecting your Router to your
computer and modem. Follow the steps on the screen using the
pictures as a guide.
2.1
This step instructs you to locate
the cable connected between your
modem and the networking port on
your computer. Unplug this cable
from the computer and plug it into
the GREEN port on the Router.
Click “Next” to continue.
If you are not sure which adapter to choose, select the adapter at the
top of the list. If you mistakenly choose the wrong adapter now, you
will be able to choose a different one later.
2.2
This step instructs you to locate
the BLUE cable that is included
with your Router. Plug one end
of this cable into ANY one of the
BLUE ports on your Router. Plug
the other end of the cable into the
networking port on your computer.
Click “Next” to continue.
Page 20 / 112
18
Connecting and Configuring your Router
2.3
This step instructs you to locate
the power supply that is included
with your Router. Plug the power
supply’s small connector into the
power port on the Router. Plug the
power supply into an empty power
outlet. Click “Next” to continue.
2.4
This step instructs you to look
at the lights on the front of your
Router. Make sure the appropriate
lights are ON. Refer to the Easy
Install Wizard software on your
computer’s screen for more details.
Click “Next” to continue.
Note:
The Easy Install Wizard may
ask you to reboot your computer. If
it does, reboot your computer and
proceed with the installation.

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top