Page 31 / 51
Scroll up to view Page 26 - 30
29
USING YOUR ROUTER
Auto Update on Your Belkin Router
The Router will automatically check for a newer version of
firmware every time you log into the dashboard and alert you with
a message at the top of the screen if there is an update available.
You can choose to download the new version or ignore it.
You will see a series of prompts warning you that the firmware is
about to be updated. Please do not disconnect the power from
the Router at this time as it could cause the system to fail.
Page 32 / 51
30
USING YOUR ROUTER
30
Updating the Router’s Firmware
via the Web Interface
The following steps show you how to update your Router’s
firmware using its web interface. You do not need to be connected
to the Internet as this interface is built into the Router itself.
Setup steps:
1°
Locate and download the firmware file from the Belkin
support site. (Type your part number into the search box in
the top right corner and look for “Firmware” in the title.)
2°
Save the file to a location on your computer where
you can get to it easily, such as your desktop.
3°
Connect the computer to one of the four LAN
ports on the Router (refer to image).
4
. Open a web browser on the computer.
5°
In the address bar of the web browser, type “http://router” or
Page 33 / 51
31
USING YOUR ROUTER
31
6°
Click on “Firmware Update” toward the bottom.
7°
Click the “Choose File” button toward the middle of the
screen to search for the file you saved previously.
Note:
The firmware version in the image above is
depicted as an example. Your file name will vary
depending on your model and version.
Page 34 / 51
32
USING YOUR ROUTER
32
9°
Click the “Update” button.
10°
A prompt asking, “Are you sure you want to continue
with upgrading?” will appear. Click “OK”.
11°
A second prompt will open telling you the Router will not
respond during the upgrade and warning you not to remove
the power supply from the Router. Click “OK” once more.
Congratulations. The firmware has been updated successfully.
8°
Select the firmware file by left-clicking on it and then click
the “Open” button in the lower-right corner of the window.
This will take you back into the Router’s interface.
Page 35 / 51
33
USING YOUR ROUTER
Resetting the Router
Reset Button – Red
The “Reset” button is used in rare cases when the Router
may function improperly. Resetting the Router will restore the
Router’s normal operation while maintaining the programmed
settings. You can also restore the factory default settings by
using the “Reset” button. Use the restore option in instances
where you may have forgotten your custom password.
Resetting the Router
Push and release the “Reset” button. The lights on the Router will
momentarily flash. The “Router” light will begin to blink. When
the “Router” light becomes solid again, the reset is complete.
Restoring Your Router to Factory Defaults
Press and hold the “Reset” button for at least 5 seconds,
and then release it. The lights on the Router will momentarily
flash. The “Router” light will begin to blink. When the “Router”
light becomes solid again, the restore is complete.
19216811.live