Page 26 / 48
Scroll up to view Page 21 - 25
24
UsING YOUR ROUTER
24
4°
Open a web browser on the computer°
5°
In the address bar of the web browser, type
“http://192°168°2°1” and press “Enter” on your keyboard°
6°
Click “Login” in the upper right-hand corner of the page° The
Router does not ship with a password, so just click “Submit”°
7°
Click on “Firmware Update” toward the
bottom of the left-hand menu°
Page 27 / 48
25
UsING YOUR ROUTER
25
8°
Click the “Browse” button toward the middle of the
screen to search for the file you saved previously°
Note:
The firmware version in the images below is
depicted as an example° Your file name will vary
depending on your model and version°
9°
Select the firmware file by left-clicking on it and then click
the “Open” button in the lower-right corner of the window°
This will take you back into the Router’s interface°
Page 28 / 48
26
UsING YOUR ROUTER
26
10°
Click the “Update” button°
11°
A prompt asking, “Are you sure you want to continue
with upgrading?” will appear° Click “OK”°
12°
A second prompt will open telling you the Router will not
respond during the upgrade and warning you not to remove
the power supply from the Router° Click “OK” once more°
Congratulations° The firmware has been updated successfully°
Page 29 / 48
27
UsING YOUR ROUTER
Resetting the Router
Reset Button – Red
The “Reset” button is used in rare cases when the Router
may function improperly° Resetting the Router will restore the
Router’s normal operation while maintaining the programmed
settings° You can also restore the factory default settings by
using the “Reset” button° Use the restore option in instances
where you may have forgotten your custom password°
Resetting the Router
Push and release the “Reset” button° The lights on the Router will
momentarily flash° The “Router” light will begin to blink° When
the “Router” light becomes solid again, the reset is complete°
ReStoring Your Router to Factory DefaultS
Press and hold the “Reset” button for at least 10 seconds,
and then release it° The lights on the Router will momentarily
flash° The “Router” light will begin to blink° When the “Router”
light becomes solid again, the restore is complete°
Page 30 / 48
28
UsING YOUR ROUTER
Restoring the Router to Default
Settings Using the Web Interface
Symptoms
You need to restore the factory defaults using the web interface°
This may be because the Router is not performing as expected
or you wish to remove all previously configured settings°
Setup steps
1°
Open a web browser on the computer°
2
°
In the address bar of the web browser, type “http://192°168°2°1”°
3°
Click “Login” in the upper right-hand corner of the page° The
Router does not ship with a password, so just click “Submit”°
19216811.live