Page 11 / 30 Scroll up to view Page 6 - 10
9
GETTING STARTED
Adding Computers to Your Network
Wireless devices such as computers, network printers, and gaming
systems can connect to your Router with a few simple steps°
Using the CD
Put the Setup CD into your computer° If the CD
doesn’t open automatically, browse to your CD
drive and open the Belkin Setup CD icon°
Click the Setup icon on the CD menu°
After a brief installation, the setup software will ask you for the
network name and password from the network information card
that came with your Router° This card is most likely now located
underneath the foot of your Router in the provided card slot°
A progress screen will appear while additional software is
installed° This may take a few minutes to complete° Once
finished, a “Success” message will appear indicating that you
are connected to the Internet via your new Belkin Router°
Note:
The setup software runs only on
Windows and Mac OS X systems°
Page 12 / 30
10
GETTING STARTED
Manually
If you choose not to use the included Setup CD for
adding additional computers or wireless devices, you
can manually add these items to your network°
Locate the wireless-network-connections option
on your computer or wireless device°
Select your Belkin Router from the list of available networks° You
can identify your Belkin Router by locating the network name
(SSID) from the card located underneath the foot of your Router°
Enter your network password (located on
your network information card)°
Your wireless device will take a few moments to connect to your
network° If the connection is not made the first time, try this
process again° If you still have difficulty connecting to your network
after trying this process a few times, see the “Troubleshooting”
section in this manual for help with connecting to your network°
Note:
In some cases you may be prompted to select the
security type° It is printed on the card for your convenience°
Using the WPS Button
Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi-Fi device that you would like to connect
wirelessly to your Router° Often there will be a button for this
purpose in software that came with the device, or a physical
“WPS,” “PBC,” or “Security” button on the device itself°
Within two minutes, press the WPS button on your Router°
The WPS light (small light above WPS button) will blink green while
it listens for your Wi-Fi device° Once a connection is established, the
light will turn green and then go out° If a connection is not established,
the light will blink amber° You may repeat the process to try again°
You can repeat this process for each WPS-enabled
device you’d like to add to your network°
Page 13 / 30
11
GETTING TO KNOW YOUR ROUTER
A) Router Status Light
Your Router’s status is shown by the light on the front°
Off:
The Router is not plugged into a power source°
Blinking Green:
The Router is starting up°
Solid Green:
The Router is connected to the Internet°
Blinking Amber:
The Router can’t detect the modem° Either the
modem is off, is not plugged into the Router, or is unresponsive°
B) Wi-Fi Protected Setup (WPS) Light and Button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers° To use
the WPS feature on your Router, see “Getting Started > Adding
Computers to Your Network > Using the WPS Button”°
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection°
Off:
Idle
Blinking Green:
The Router is listening for a
WPS-enabled computer or other device°
Solid Green:
The Router has made a secure
connection with the computer or other device°
Amber:
A connection was not created°
Front Panel
(a)
(b)
Page 14 / 30
12
GETTING TO KNOW YOUR ROUTER
A) Modem (WAN) Connector
Connect your modem to this
port using an Ethernet cable°
B) Wired (LAN) Connectors
Connect computers and other
wired network devices to these
ports using Ethernet cables°
C) Reset Button
This button is used to restart
your Router in rare cases when it
functions incorrectly° Resetting
the Router will preserve your
settings° This button may also
be used to restore the factory
default settings° Please see
the Troubleshooting section
for more information°
D) Power Connector
Connect the included power
supply to this jack°
Back Panel
(a)
(b)
(c)
(d)
Page 15 / 30
13
TECHNICAL DETAILS
Technical Features
Integrated 802°11n Wireless Access Point
The N150 technology enhances your Router’s
wireless capabilities, allowing for data transfer speeds
of up to 150Mbps across your network°
NAT IP Address Sharing
To save you the cost of adding IP addresses per
computer in your house, your Belkin Router uses Network
Address Translation (NAT) technology, allowing you to
share a single IP address across your network°
SPI Firewall
Your Router is equipped with a firewall that will protect your
network from a wide array of common attacks and viruses°
Universal Plug-and-Play (UPnP) Compatibility
The UPnP (Universal Plug-and-Play) feature in your Router
offers seamless operation of voice and video messaging,
games, and other applications that are UPnP-compliant°
Web-Based Advanced User Interface
You can easily make changes to your Router’s advanced
settings through your web browser° These changes can
be made from any computer on your network°
Belkin Router Monitor
The Belkin Router Monitor application helps you to monitor
your Router’s status and change network settings°
Integrated 4-Port 10/100 Switch
Your Router has a built-in, 4-port network switch to
allow your wired computers to share: printers, data,
MP3 files, digital photos, and much more°

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top