Page 71 / 93
Scroll up to view Page 66 - 70
69
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
MANUALLY CONFIGURING NETWORK SETTINGS
7
Set up the computer that is connected to the cable or DSL modem
FIRST using these steps° You can also use these steps to add
computers to your Router after the Router has been set up to connect
to the Internet°
Manually Configuring Network Settings in Mac OS up to 9°x
1°
Pull down the Apple menu° Select “Control Panels” and select
“TCP/IP”°
2°
You will see the TCP/IP control panel° Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu
(1)
°
3°
Next to “Configure”
(2)
, if “Manually” is selected, your Router will
need to be set up for a static IP connection type° Write the address
information in the table below° You will need to enter this information
into the Router°
(1)
(2)
4°
If not already set, at “Configure:”, choose “Using DHCP Server”°
This will tell the computer to obtain an IP address from the Router°
5°
Close the window° If you made any changes, the following window will
appear° Click “Save”°
Restart the computer° When the computer restarts, your network
settings are now configured for use with the Router°
Page 72 / 93
70
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Settings in Mac OS X
1°
Click on the “System Preferences” icon°
3°
Select “Built-in Ethernet”
(2)
next to “Show” in the Network menu°
Select “Network”
(1)
from the “System Preferences” menu°
(1)
4°
Select the “TCP/IP” tab
(3)
° Next to “Configure”
(4)
, you should see
“Manually” or “Using DHCP”° If you do not, check the PPPoE tab
(5)
to make sure that “Connect using PPPoE” is NOT selected° If it is, you
will need to configure your Router for a PPPoE connection type using
your user name and password°
(2)
(3)
(4)
(5)
Page 73 / 93
71
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
5°
If “Manually” is selected, your Router will need to be set up for a
static IP connection type° Write the address information in the table
below° You will need to enter this information into the Router°
6°
If not already selected, select “Using DHCP” next to “Configure”
(4)
,
then click “Apply Now”°
Your network settings are now configured for use with the Router°
Page 74 / 93
72
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Settings in Windows 2000, NT, or XP
1°
Click “Start”, “Settings”, then “Control Panel”°
2°
Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network” icon (Windows XP)°
3°
Right-click on the “Local Area Connection” associated with your
network adapter and select “Properties” from the drop-down menu°
4°
In the “Local Area Connection Properties” window, click “Internet
Protocol (TCP/IP)” and click the “Properties” button° The following
screen will appear:
5°
If “Use the following IP address”
(2)
is selected, your Router will
need to be set up for a static IP connection type° Write the address
information the table below° You will need to enter this information
into the Router°
(1)
(2)
(3)
6°
If not already selected, select “Obtain an IP address automatically”
(1)
and “Obtain DNS server address automatically”
(3)
° Click “OK”°
Your network settings are now configured for use with the Router°
Page 75 / 93
73
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Settings in Windows 98 or Me
1°
Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu°
2°
Select “TCP/IP -> settings” for your installed network adapter° You will
see the following window°
3°
If “Specify and IP address” is selected, your Router will need to be set
up for a static IP connection type° Write the address information in the
table below° You will need to enter this information into the Router°
4°
Write the IP address and subnet mask from the “IP Address” tab
(3)
°
(1)
(2)
(3)
5°
Click the “Gateway” tab
(2)
° Write the gateway address down in
the chart°
6°
Click the “DNS Configuration” tab
(1)
° Write the DNS address(es) in
the chart°
7°
If not already selected, select “Obtain IP address automatically”
on the IP address tab° Click “OK”°
Restart the computer° When the computer restarts, your network
settings are now configured for use with the Router°
19216811.live