1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D8635-4v1
    5. /
  5. 4
Page 16 / 93 Scroll up to view Page 11 - 15
14
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
CONNECTING AND CONFIGURING YOUR ROUTER
4
Verify the contents of your box° You should have the following:
•
Belkin N+ Wireless Modem Router
•
RJ11 Telephone Cord
•
RJ45 Ethernet Networking Cable
•
Power Supply
•
Belkin Setup Assistant Software CD
•
User Manual on CD
•
Network Status Display Guide
•
Wireless Security Setup Guide
•
ADSL Filter
Setup Assistant
Belkin has provided our Setup Assistant software to make installing
your Router a simple and easy task° You can use it to get your
Router up and running in minutes° The Setup Assistant requires
that your Windows 2000 or XP computer be connected directly to
your ADSL and that the Internet connection is
active and working
at the time of installation° If it is not, you must use the “Alternate
Setup Method” section of this User Manual to configure your Router°
Additionally, if you are using an operating system other than Windows
2000, XP, or Vista, or Mac OS X v10°x, you must set up the Router
using the “Alternate Setup Method” section of this User Manual°
Page 17 / 93
15
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
Step 1: Hardware Connections – Follow the Quick Installation Guide (QIG)
2
1
4
3
3
1°1 Brand-New Setup
Follow these steps if you are not replacing an existing modem° If you are
replacing an existing modem, skip to the next section, “Replacing an
Existing Modem or Modem Router”, starting on page 16°
1°
Unpack your new Router from the box and place it next to your
computer° Raise the Router’s antennas°
2°
Retrieve the yellow RJ45 cable that was included with your Router°
First, connect one end to any yellow port labeled “to Wired
Computers” on the back of your Router° Then, connect the other
end to the networking port on the back of your computer°
3°
Retrieve the included gray RJ11 phone cord° Connect one end to
the gray port labeled “to ADSL” on the back of your Router° Then
connect the other end to your ADSL connection (either a wall jack
or an ADSL splitter)°
Note:
Some ADSL connections require a microfilter° Your ADSL provider
can tell you if you need one° Belkin includes a microfilter in regions
known to use them° You may or may not have received one in your box°
4°
Plug your Router’s power supply into the black port labeled
“Power” on the back of your Router°
5°
Wait 20 seconds for the Router to start up° Look at the display on
the front of the Router° Make sure the “Wired” and “Router” icons
are lit up in blue° If they are not, recheck your connections°
Page 18 / 93
16
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
1°2 Replacing an Existing Modem or Modem Router
Follow these steps if you currently have a modem or a modem router
that you will be replacing with your new Router°
1°
Unpack your new Router from the box and place it next to
your old modem° Raise the Router’s antennas° Unplug your old
modem’s power cord°
2°
Locate the cable that connects your old modem to your
computer° Unplug that cable from your old modem, and plug it
into any yellow port labeled “to Wired Computers” on the back of
your new Router°
3°
Locate the cable that connects your old modem to the ADSL wall
jack° Unplug it from your old modem and then connect it to the
gray port labeled “to ADSL” on the back of your Router°
4°
Plug your Router’s power supply into the black port labeled
“Power” on the back of your Router°
5°
Wait 20 seconds for the Router to start up° Look at the display
on the front of the Router° Make sure the “Wired” and “Router”
icons are lit in blue° If they are not, recheck your connections°
2
1
3
4
3
LA
N
ADSL
Page 19 / 93
17
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
Select Country
Select your country from the drop-down box° Click “Begin” to continue°
Note for Windows Users:
If the Setup Assistant does not start
up automatically, select your CD-ROM drive from “My Computer”
and double-click on the file named “SetupAssistant” to start the
Setup Assistant°
Step 2: Set Up the Router – Run the Setup Assistant Software
A° Shut down any programs that are running on your computer
at this time°
Turn off any firewall or Internet-connection-sharing software on
your computer°
B° Insert the CD into your computer° The Setup Assistant will
automatically appear on your computer’s screen within
15 seconds° Click on “Setup Assistant” to run the Setup
Assistant° Follow the instructions there°
IMPORTANT:
Run the Setup Assistant from the computer that is
directly connected to the Router from Step 1 – B°
Page 20 / 93
18
N+ Wireless Modem Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
Confirmation Screen
Verify that you have completed all QIG steps by checking the box to the
right of the arrow° Click “Next” to continue°
Progress Screen
Setup Assistant will show you a progress screen each time a step in the
setup has been completed°

Rate

4 / 5 based on 1 vote.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top