1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D8235-4v3
    5. /
  5. 7
Page 31 / 91 Scroll up to view Page 26 - 30
29
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
Setting your ISP Connection Type to PPPoE
Most DSL providers use PPPoE as the connection type° If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into
the service° If you have an Internet connection in your home or small office that doesn’t require a modem, you may also use PPPoE°
1�
User Name
This space is provided to type in your user name that was assigned by
your ISP°
2�
Password
Type in your password and retype it into the “Retype Password” box to
confirm it°
3�
Service Name
A service name is rarely required by an ISP° If you are not sure if your
ISP requires a service name, leave this blank°
4�
MTU
The MTU setting should never be changed unless your ISP gives you
a specific MTU setting° Making changes to the MTU setting can cause
problems with your Internet connection including disconnection from the
Internet, slow Internet access, and problems with Internet applications
working properly°
5�
Disconnect after X���
The “Disconnect” feature is used to automatically disconnect the Router
from your ISP when there is no activity for a specified period of time° For
instance, placing a check mark next to this option and entering “5” into
the minute field will cause the Router to disconnect from the Internet
after five minutes of no Internet activity° This option should be used if
you pay for your Internet service by the minute°
Your connection type is PPPoE if:
1)
Your ISP gave you a user name and password, which is required to
connect to the Internet°
2)
Your ISP gave you software such as WinPOET or Enternet300 that
you use to connect to the Internet°
3)
You have to double-click on a desktop icon other than your
browser to get on the Internet°
(1)
(2)
(3)
(4)
(5)
Downloaded from
www.Manualslib.com
manuals search engine
Page 32 / 91
30
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
Setting your Internet Service Provider (ISP) Connection Type to Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only]
�
Some ISPs require a connection using PPTP protocol, a type of connection most common in European countries° This sets up a direct connection to
the ISP’s system° Type in the information provided by your ISP in the space provided° When you have finished, click “Apply Changes”
(9)
° After you
apply the changes, the Internet Status indicator will read “connection OK” if your Router is set up properly°
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Downloaded from
www.Manualslib.com
manuals search engine
Page 33 / 91
31
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
1�
PPTP Account
Provided by your ISP° Enter your PPTP account name here°
2�
PPTP Password
Type in your password and retype it into the “Retype Password” box to
confirm it°
3�
Host Name
Provided by your ISP° Enter your host name here°
The following becomes visible when you deselect “Get IP by DHCP”°
4�
Service IP Address
Provided by your ISP° Enter your service IP address here°
5�
My IP Address
Provided by your ISP° Enter the IP address here°
6�
My Subnet Mask
Provided by your ISP° Enter the IP address here°
7�
Default Gateway
Provided by your ISP° If your ISP did not give you a connection ID
(default gateway), leave this blank°
8�
Disconnect after X…
The “Disconnect” feature is used to automatically disconnect the Router
from your ISP when there is no activity for a specified period of time° For
instance, placing a check mark next to this option and entering “5” into
the minute field will cause the Router to disconnect from the Internet
after five minutes of no Internet activity° This option should be used if
you pay for your Internet service by the minute°
Downloaded from
www.Manualslib.com
manuals search engine
Page 34 / 91
32
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
Setting your Connection Type if You Are a Telstra® BigPond User
[Australia Only]
Your user name and password are provided to you by Telstra BigPond° Enter this information below° Choosing your state from the drop-down menu
(1)
will automatically fill in your login server IP address° If your login server address is different than one provided here, you may manually enter the
login server IP address by placing a check in the box next to “User decide login server manually”
(4)
and type in the address next to “Login Server”
(5)
° When you have entered all of your information, click “Apply Changes”
(7)
° After you apply the changes, the Internet Status indicator will read
“connection OK” if your Router is set up properly°
1�
Select your State
Select your state from the drop-down menu
(1)
° The “Login Server” box
will automatically be filled in with an IP address° If for some reason this
address does not match the address that Telstra has given, you can
manually enter the login server address° See “User decide login server
manually”
(4)
°
2�
User Name
Provided by your ISP° Type in your user name here
(2)
°
3�
Password
Type in your password and retype it into the “Retype Password” box
(3)
to confirm it°
4�
User Decide Login Server Manually
If your login server IP address is not available in the “Select Your
State” drop-down menu
(1)
, you may manually enter the login server IP
address by placing a check in the box next to “User decide login server
manually”
(4)
and type in the address next to “Login Server”
(5)
°
(1)
(2)
(3)
(4)
(5)
(7)
Downloaded from
www.Manualslib.com
manuals search engine
Page 35 / 91
33
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
Setting Custom Domain Name Server (DNS) Settings
A “Domain Name Server” is a server located on the Internet that translates Universal Resource Locaters (URLs) like “www°belkin°com” to IP
addresses° Many Internet Service Providers (ISPs) do not require you to enter this information into the Router° The “Automatic from ISP” box
(1)
should be checked if your ISP did not give you a specific DNS address° If you are using a static IP connection type, then you may need to enter a
specific DNS address and secondary DNS address for your connection to work properly° If your connection type is dynamic or PPPoE, it is likely that
you do not have to enter a DNS address° Leave the “Automatic from ISP” box checked° To enter the DNS address settings, uncheck the “Automatic
from ISP” box and enter your DNS entries in the spaces provided° Click “Apply Changes”
(2)
to save the settings°
(1)
(2)
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top