1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D8235-4v3
    5. /
  5. 3
Page 11 / 91 Scroll up to view Page 6 - 10
9
N+ Wireless Router
SECTIONS
Table of Contents
1
2
4
5
6
7
8
9
10
3
KNOWING YOUR ROUTER
G� Router/Power Status
When you apply power to the Router or restart it, a short period of time
elapses while the Router boots up° During this time, the “router” icon
blinks° When the Router has completely booted up, the “router” icon
becomes a solid light, indicating the Router is ready for use°
Off
Router is off
Blinking Blue
Router is booting up
Solid Blue
Router is on and ready
H� Wireless Status
Off
Wireless is off
Solid Blue
Wireless is on
I� Modem Status
This icon lights in blue to indicate that your Router is connected properly
to the modem° It turns amber when a problem is detected°
Off
Router is NOT connected to
modem
Solid Blue
Router is connected to modem
and functioning properly
Blinking Amber
Problem with modem
J� Internet Status
This unique icon shows you when the Router is connected to the
Internet° When the light is off, the Router is NOT connected to the
Internet° When the light is blinking amber, the Router is attempting
to connect to the Internet° When the light is solid blue, the Router is
connected to the Internet° When using the “Disconnect after x minutes”
feature, this icon becomes extremely useful in monitoring the status of
your Router’s connection°
Off
Router is NOT connected to the
Internet
Blinking Blue
Router is attempting to connect
to the Internet
Solid Blue
Router is connected to the
Internet
Blinking Amber
Problem with connecting to the
Internet
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 91
10
N+ Wireless Router
SECTIONS
Table of Contents
1
2
4
5
6
7
8
9
10
3
KNOWING YOUR ROUTER
K� Connections to Wired Computers
Connect your wired (non-wireless) computers to these ports° These
ports are RJ45, 10/100/1000 auto-negotiation, auto-uplinking ports for
standard UTP category 5 or 6 Ethernet cable° The ports are labeled 1
through 4°
L� USB Port
Plug in your USB storage device here°
M� Connection to Modem
This port is for connection to your cable or DSL modem° Use the cable
that was provided with the modem to connect the modem to this port°
Use of a cable other than the one supplied with the cable modem may
not work properly°
N� Reset Button
The “Reset” button is used in rare cases when the Router may function
improperly° Resetting the Router will restore the Router’s normal
operation while maintaining the programmed settings° You can also
restore the factory default settings by using the “Reset” button° Use the
restore option in instances where you may have forgotten your custom
password°
i� Resetting the Router
Push and release the “Reset” button° The lights on the Router will
momentarily flash° The “Power/Ready” light will begin to blink° When
the “Power/Ready” light becomes solid again, the reset is complete°
ii� Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds, then
release it° The lights on the Router will momentarily flash° The
“Power/Ready” light will begin to blink° When the “Power/Ready”
light becomes solid again, the restore is complete°
O� Power Jack – Black
Connect the included 12V/1°5A
DC power supply to this jack°
(K)
(L)
(M)
(N)
(O)
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 91
11
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
CONNECTING AND CONFIGURING YOUR ROUTER
4
Verify the contents of your box� You should have the following:
•
Belkin N+ Wireless Router
•
RJ45 Ethernet Networking Cable
•
Power Supply
•
Belkin Setup Assistant Software CD
•
User Manual on the Setup Assistant CD
•
Network Status Display Guide
•
Wireless Security Setup Guide
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port° Many modems have both an RJ45 Ethernet port and a USB
connection° If you have a modem with both Ethernet and USB, and are
using the USB connection at this time, you will be instructed to use the
RJ45 Ethernet port during the installation procedure° If your modem has
only a USB port, you can request a different type of modem from your
ISP, or you can, in some cases, purchase a modem that has an RJ45
Ethernet port on it°
Ethernet
USB
Setup Assistant
Belkin has provided our Setup Assistant software to make installing your
Router a simple and easy task° You can use it to get your Router up and
running in minutes° The Setup Assistant requires that your computer be
connected directly to your cable or DSL modem and that the Internet
connection is
active and working
at the time of installation° If it is not,
you must use the “Alternate Setup Method” section of this User Manual
to configure your Router° Additionally, if you are using an operating
system other than Windows 2000, XP, or Vista, or Mac OS X v10°x, you
must set up the Router using the “Alternate Setup Method” section of
this User Manual°
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 91
12
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
Step 1: Hardware Connections
1�
Find the cable connecting your modem and computer*° Unplug it
from the computer and plug it into the yellow port on the Belkin
Router°
2�
Connect the new cable (provided in the box) to any gray port on
the Router° Plug the other end into a network (Ethernet) port on
your computer°
3�
Plug the power supply into a wall outlet, and the other end into the
black port on the Belkin Router° As the Router wakes up, lights will
come on; recheck your connections if the “Wired” and “Router”
lights are not a steady blue after 20 seconds°
4�
Rotate the antennas up°
5�
Locate the CD in this guide and insert it into your computer° The
Setup Wizard should appear automatically° If it doesn’t, open
the CD in My Computer (Windows) or the Finder (Mac OS X) and
double-click the “Router Setup” icon°
*If you are replacing an existing router, find the cable connecting the modem and old router°
Disconnect it from the old router and plug it into the yellow port on the new router°
LAN
WAN
2
3
3
3
1
1
4
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 91
13
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
5
6
7
8
9
10
4
CONNECTING AND CONFIGURING YOUR ROUTER
Note for Windows Users:
If the Setup Assistant does not start up
automatically, select your CD-ROM drive from “My Computer” and
double-click on the file named “SetupAssistant” to start the Setup
Assistant°
Step 2: Set Up the Router – Run the Setup Assistant Software
A�
Shut down any programs that are running on your computer at this
time° Turn off any firewall or Internet-connection-sharing software
on your computer°
B�
Insert the CD into your computer° The Setup Assistant will
automatically appear on your computer’s screen within 15 seconds°
Click on “Go” to run the Setup Assistant° Follow the instructions
there°
IMPORTANT:
Run the Setup Assistant from the computer that is
directly connected to the Router from Step 1 – B°
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top