1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D8235-4v3
    5. /
  5. 15
Page 71 / 91 Scroll up to view Page 66 - 70
69
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Settings in Windows 2000, NT, or XP
1�
Click “Start”, “Settings”, then “Control Panel”°
2�
Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network” icon (Windows XP)°
3�
Right-click on the “Local Area Connection” associated with your
network adapter and select “Properties” from the drop-down
menu°
4�
In the “Local Area Connection Properties” window, click “Internet
Protocol (TCP/IP)” and click the “Properties” button° The following
screen will appear:
(1)
(2)
(3)
5�
If “Use the following IP address”
(2
) is selected, your Router will
need to be set up for a static IP connection type° Write the address
information the table below° You will need to enter this information
into the Router°
6�
If not already selected, select “Obtain an IP address automatically”
(1)
and “Obtain DNS server address automatically”
(3)
° Click “OK”°
Your network settings are now configured for use with the Router�
Downloaded from
www.Manualslib.com
manuals search engine
Page 72 / 91
70
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Settings in Windows 98 or Me
1�
Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu°
2�
Select “TCP/IP -> settings” for your installed network adapter° You
will see the following window
(1)
(3)
(2)
3�
If “Specify and IP address” is selected, your Router will need
to be set up for a static IP connection type° Write the address
information in the table below° You will need to enter this
information into the Router°
4�
Write the IP address and subnet mask from the “IP Address” tab
(3)
°
5�
Click the “Gateway” tab
(2)
° Write the gateway address down in the
chart°
6�
Click the “DNS Configuration” tab
(1)
° Write the DNS address(es) in
the chart
7�
If not already selected, select “Obtain IP address automatically” on
the IP address tab° Click “OK”°
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�
Downloaded from
www.Manualslib.com
manuals search engine
Page 73 / 91
71
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
9
10
RECOMMENDED WEB BROWSER SETTINGS
8
Recommended Web Browser Settings
In most cases, you will not need to make any changes to your web browser’s settings° If you are having trouble accessing the Internet or the Web-
Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section°
2�
In the “Internet Options” screen, there are three selections: “Never
dial a connection”, “Dial whenever a network connection is not
present”, and “Always dial my default connection”° If you can make
a selection, select “Never dial a connection”° If you cannot make a
selection, go to the next step°
Microsoft® Internet Explorer 4�0 or Higher
1�
Start your web browser° Select “Tools” then “Internet Options”°
Downloaded from
www.Manualslib.com
manuals search engine
Page 74 / 91
72
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
9
10
8
RECOMMENDED WEB BROWSER SETTINGS
3�
Under the “Internet Options” screen, click on “Connections” and
select “LAN Settings…”°
4�
Make sure there are no check marks next to any of the displayed
options: “Automatically detect settings”, “Use automatic
configuration script”, and “Use a proxy server”° Click “OK”° Then
click “OK” again in the “Internet Options” page°
Netscape® Navigator® 4�0 or Higher
1�
Start Netscape° Click on “Edit” then “Preferences”°
2�
In the “Preferences” window, click on “Advanced” then select
“Proxies”° In the “Proxies” window, select “Direct connection to the
Internet”°
Downloaded from
www.Manualslib.com
manuals search engine
Page 75 / 91
73
N+ Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
7
8
10
TROUBLESHOOTING
9
Troubleshooting
Setup Assistant CD does not automatically start�
If the CD-ROM does not start the Setup Assistant automatically, it could
be that the computer is running other applications that are interfering
with the CD drive°
1�
If the Setup Assistant Welcome screen does not appear within
15-20 seconds, open up your CD-ROM drive by double-clicking on
the “My Computer” icon that is located on your desktop°
2�
Next, double-click on the CD-ROM drive that the Setup Assistant
CD has been placed in to start the installation°
3�
The Setup Assistant should start within a few seconds° If, instead,
a window appears showing the files on the CD, double-click on the
icon labeled “SetupAssistant”°
4�
If the Setup Assistant still does not start, reference the section
titled “Manually Configuring Network Settings” (page 67) of this
User Manual for an alternative setup method)°
Setup Assistant cannot find my Router�
If the Setup Assistant is not able to find the Router during the installation
process, please check the following items:
1�
If the Setup Assistant is not able to find the Router during the
installation process, there may be third-party firewall software
installed on the computer attempting to access the Internet°
Examples of third-party firewall software are ZoneAlarm, BlackICE
PC Protection, McAfee Personal Firewall, and Norton Personal
Firewall° If you do have firewall software installed on your
computer, please make sure that you properly configure it° You can
determine if the firewall software is preventing Internet access by
temporarily turning it off° If, while the firewall is disabled, Internet
access works properly, you will need to change the firewall settings
to function properly when it is turned on° Please refer to the
instructions provided by the publisher of your firewall software for
instructions on configuring the firewall to allow Internet access°
2�
Unplug power to the Router for 10 seconds, and then plug the
power back into the Router° Ensure that the Router’s “router” LED
is on; it should be solid BLUE° If not, check to make sure that the
AC adapter is connected to the Router and plugged into a wall
outlet°
3�
Ensure that you have a cable connected between the network
(Ethernet) port on the back of the computer and one of the “to
Wired Computers” ports on the back of the Router°
Note
: The computer should NOT be connected to the port labeled “to
Modem” on the back of the Router°
4�
Try shutting down and restarting your computer, then rerunning the
Setup Assistant°
If the Setup Assistant is still unable to find the Router, reference the
section titled “Manually Configuring Network Settings” for installation
steps°
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top