1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D7632-4
    5. /
  5. 4
Page 16 / 108 Scroll up to view Page 11 - 15
16
16
7.
Double-check the settings shown on the following screen. You can
click “Back” to change the settings or click “Next” to confirm
Note:
You can always restart the Setup Wizard or use the Navigation
Menu on the left to change your setting.
8.
Congratulations! You have finished installing your new Belkin
Router. Click “OK” to activate your settings. To test your
Internet connection, open your browser and visit any website,
such as
www.belkin.com
. For advanced features and more
detailed installation and security setup information, see the
following section,
“Manually Configuring your Router”
.
Connecting your Router
Page 17 / 108
17
17
section
2
1
3
4
5
6
7
8
9
10
12
Understanding the Web-Based User Interface
The home page shows you a quick view of the Router’s status and settings. All
advanced setup pages can be reached from this page.
1
.
Quick-Navigation Links
You can go directly to any of the Router’s UI pages by clicking directly
on these links. The links are divided into logical categories and grouped
by tabs to make finding a particular setting easier to find. Clicking on the
header of each tab will show you a short description of the tab’s function.
2.
Home Button
The “Home” button is available in every page of the UI. Pressing this
button will take you back to the home page.
3.
Help Button
The “Help” button gives you access to the Router’s help pages. Help
is also available on many pages by clicking “more info” next to certain
sections of each page.
Manually Configuring your Router
(1)
(2)
(5)
(4)
(3)
(10)
(6)
(7)
(8)
(9)
Page 18 / 108
18
Manually Configuring your Router
4.
Login/Logout Button
This button enables you to log in and out of the Router with the press of
one button. When you are logged into the Router, this button will change
to read “Logout”. Logging into the Router will take you to a separate login
page where you will need to enter a password. When you are logged into
the Router, you can make changes to the settings. When you are finished
making changes, you can log out of the Router by clicking the “Logout”
button. For more information about logging into the Router, see the section
called “Logging into the Router”.
5.
Internet Status Indicator
This indicator is visible in all pages of the Router, showing the connection
status of the Router. When the indicator says “connection OK” in GREEN,
the Router is connected to the Internet. When the Router is not connected
to the Internet, the indicator will read “no connection” in RED. The indicator
is automatically updated when you make changes to the settings of the
Router.
6.
LAN Settings
Shows you the settings of the Local Area Network (LAN) side of the
Router. Changes can be made to the settings by clicking the “LAN” “Quick
Navigation” link on the left side of the screen.
7.
Features
Shows the status of the Router’s UPnP, NAT, and firewall features. Changes
can be made to the settings by clicking on any one of the links or by
clicking the “Quick Navigation” links on the left side of the screen.
8.
Internet Settings
Shows the settings of the Internet/WAN side of the Router that connects to
the Internet. Changes to any of these settings can be made by clicking on
the “Internet/WAN” “Quick Navigation” link on the left side of the screen.
9.
Version Info
Shows the firmware version, boot-code version, hardware version, and
serial number of the Router.
10.
Page Name
The page you are on can be identified by this name. This manual will
sometimes refer to pages by name. For instance, “LAN > LAN Settings”
refers to the “LAN Settings” page.
Page 19 / 108
Manually Configuring your Router
19
section
2
1
3
4
5
6
7
8
9
10
Changing LAN Settings
All settings for the internal LAN setup of the Router can be viewed and
changed here.
LAN Settings
Clicking on the header of the LAN tab (A) will take you to the
LAN tab’s header page. A quick description of the functions can
be found here. To view the settings or make changes to any of
the LAN settings, click on “LAN Settings” (B) or to view the list
of connected computers, click on “DHCP Client List” (C).
1.
IP Address
The “IP address” is the internal IP address of the Router. The default
IP address is “192.168.2.1”. To access the setup interface, type this
IP address into the address bar of your browser. This address can
be changed if needed. To change the IP address, type in the new
IP address and click “Apply Changes”. The IP address you choose
should be a non-routable IP. Examples of a non-routable IP are:
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
2.
Subnet Mask
There is no need to change the subnet mask. This is a unique,
advanced feature of your Belkin Router.
Page 20 / 108
20
Manually Configuring your Router
3.
DHCP Server
The DHCP server function makes setting up a network very easy by
assigning IP addresses to each computer on the network automatically.
The default setting is “On”. The DHCP server can be turned OFF if
necessary, however, in order to do so you must manually set a static IP
address for each computer on your network. To turn off the DHCP server,
select “Off” and click “Apply Changes”.
4.
IP Pool
The IP Pool is the range of IP addresses set aside for dynamic assignment
to the computers on your network. The default is 2–100 (99 computers). If
you want to change this number, you can do so by entering a new starting
and ending IP address and clicking on “Apply Changes”. The DHCP server
can assign 100 IP addresses automatically. This means that you cannot
specify an IP address pool larger than 100 computers. For example, starting
at 50 means you have to end at 150 or lower so as not to exceed the 100-
client limit. The starting IP address must be lower in number than the ending
IP address.

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top