Page 101 / 108 Scroll up to view Page 96 - 100
Appendixes
101
section
2
1
3
4
5
6
7
8
9
10
5. Secure Connections, VPNs, and AOL
Secure connections typically require a user name and password, and
are used where security is important. Secure connections include:
Virtual Private Network (VPN) connections, often used to connect
remotely to an office network
The “Bring Your Own Access” program from America Online
(AOL), which lets you use AOL through broadband provided by
another cable or DSL service
Most online banking websites
Many commercial websites that require a user name and
password to access your account
Secure connections can be interrupted by a computer’s power
management setting, which causes it to “go to sleep.” The simplest
solution to avoid this is to simply reconnect by rerunning the VPN
or AOL software, or by re-logging into the secure website.
A second alternative is to change your computer’s power management
settings so it does not go to sleep; however, this may not be appropriate
for portable computers. To change your power management setting
under Windows, see the “Power Options” item in the Control Panel.
If you continue to have difficulty with Secure Connections, VPNs, and AOL,
please review the steps above to be sure you have addressed these issues.
Page 102 / 108
102
Appendixes
Appendix C: Internet Connection Setting Table
The following table provides references to select and configure Internet
connection in setting up your ADSL connection. Many ISPs use
different settings depending on the region and equipment they use.
You may try the setting for the ISPs in your region. If it does not work,
please contact your ISP for your specific setting.
Page 103 / 108
Appendixes
103
section
2
1
3
4
5
6
7
8
9
10
Country
Connection
Protocol
VPI/VCI
Encapsulation
ISPs
Europe
France
PPPoE
8/35
LLC
Various
Germany
PPPoE
1/32
LLC
T-Online,
various
Holland
1483
Bridged
0/35
0/32
0/34
LLC
LLC
LLC
BBNed, XS4all
Versatel DHCP
Baby XL, Tiscali
(start/ Surf/
Family/ Live)
PPPoA
8/48
VC MUX
KPN, Hetnet,
HCCNet, Tiscali
(lite/ Basis/Plus)
Wanadoo
PPPoA
0/32
VC MUX
Versatel PPP,
Zonnet
PPPoE
8/35
LLC
Various
Belgium
PPPoA
8/35
LLC
Belgacom,
Tiscali, Scarlet
Italy
PPPoE or
PPPoA
8/35
VC MUX
TIN
Spain
PPPoE or
1483
Bridged
8/32
LLC
Telefonica
Sweden
1483
Bridged
3/35
LLC
Telia
UK
PPPoA
0/38
VC MUX
BT, Freeserve,
Tiscali, AOL*
Asia
Australia
PPPoE or
PPPoA
8/35
LLC
Various
New Zealand
PPPoE or
PPPoA
0/100
VC MUX
Various
Singapore
PPPoE
0/100
LLC
SingNet, Pacific
Internet
Page 104 / 108
104
Information
104
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES
FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA
90220, declare under our sole responsibility that the product,
F5D7633-4
to which this declaration relates,
complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the
FCC radio frequency exposure limits. Nevertheless, the
device shall be used in such a manner that the potential for
human contact during normal operation is minimized.
When connecting an external antenna to the device, the antenna shall
be placed in such a manner to minimize the potential for human contact
during normal operation. In order to avoid the possibility of exceeding
the FCC radio frequency exposure limits, human proximity to the antenna
shall not be less than 20cm (8 inches) during normal operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
Page 105 / 108
105
Information
105
section
2
1
3
4
5
6
7
8
9
10
Consult the dealer or an experienced radio/TV technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications to this device that are not expressly approved by Belkin
Corporation may void the user’s authority to operate the equipment.
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS 139 &
RSS 210 Industry Canada. This Class B digital apparatus
complies with Canadian ICES-003. Cet appareil numérique de
la classe B conforme á la norme NMB-003 du Canada.
Europe-European Union Notice
Radio products with the CE 0682 or CE alert marking comply
with the R&TTE Directive (1995/5/EC) issued by the Commission
of the European Community. Compliance with this directive
implies conformity to the following European Norms (in
brackets are the equivalent international standards).
EN 60950 (IEC60950) – Product Safety
EN 300 328 Technical requirement for radio equipment
ETS 300 826 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label on
your Belkin product. Products with the CE marking comply with the
EMC Directive (89/336/EEC) and the Low Voltage Directive (72/23/EEC)
issued by the Commission of the European Community. Compliance
with these directives implies conformity to the following European
Norms (in brackets are the equivalent international standards).
EN 55022 (CISPR 22) – Electromagnetic Interference
EN 55024 (IEC61000-4-2,3,4,5,6,8,11) – Electromagnetic Immunity
EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
EN 61000-3-3 (IEC610000) – Power Line Flicker
EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled
with CE 0682 or CE alert marking and may
also carry the CE logo.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top