Page 41 / 106 Scroll up to view Page 36 - 40
39
Wireless G Router
SECTIONS
Table of Contents
1
2
3
4
6
7
8
9
10
5
ALTERNATE SETUP METHOD
Configuring your WAN Media Access Controller (MAC) Address
All network components including cards, adapters, and routers, have
a unique “serial number” called a MAC address� Your Internet Service
Provider may record the MAC address of your computer’s adapter
and only let that particular computer connect to the Internet service�
When you install the Router, its own MAC address will be “seen” by the
ISP and may cause the connection not to work� Belkin has provided
the ability to clone (copy) the MAC address of the computer into the
Router� This MAC address, in turn, will be seen by the ISP’s system as
the original MAC address and will allow the connection to work� If you
are not sure whether your ISP needs to see the original MAC address,
simply clone the MAC address of the computer that was originally
connected to the modem� Cloning the address will not cause any
problems with your network�
Cloning your MAC Address
To clone your MAC address, make sure that you are using the computer
that was ORIGINALLY CONNECTED to your modem before the Router
was installed� Click the “Clone” button
(1)
� Click “Apply Changes”� Your
MAC address is now cloned to the Router�
Entering a Specific MAC Address
In certain circumstances you may need a specific WAN MAC address�
You can manually enter one in the “MAC Address” page� Type a MAC
address in the spaces provided
(2)
and click “Apply Changes” to save
the changes� The Router’s WAN MAC address will now be changed to
the MAC address you specified�
(1)
(2)
Page 42 / 106
40
Wireless G Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
USING THE WEB-BASED ADVANCED USER INTERFACE
6
Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface� In your browser, type “192�168�2�1” (do not type in
anything else such as “http://” or “www”), then press the “Enter” key�
You will see the Router’s home page in your browser window�
Page 43 / 106
41
Wireless G Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Changing LAN Settings
All settings for the internal LAN setup of the Router can be viewed and
changed here�
Viewing the LAN Settings
Clicking on the header of the “LAN Setup” tab
(1)
will take you to its
header page� A quick description of the functions can be found here� To
view the settings or make changes to any of the LAN settings, click on
“LAN Settings”
(2)
, or to view the list of connected computers, click on
“DHCP Client List”
(3)
(1)
(3)
(2)
1
2
3
4
5
6
Page 44 / 106
42
Wireless G Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
1�
IP Address
The “IP address” is the internal IP address of the Router� The default
IP address is “192�168�2�1”� To access the Web-Based Advanced User
Interface, type this IP address into the address bar of your browser�
This address can be changed if needed� To change the IP address,
type in the new IP address and click “Apply Changes”� The IP address
you choose should be a non-routable IP� Examples of a non-routable IP
are: 192�168�x�x (where x is anywhere between 0 and 255), and 10�x�x�x
(where x is anything between 0 and 255)�
2�
Subnet Mask
There is no need to change the subnet mask� This is a unique, advanced
feature of your Belkin Router� It is possible to change the subnet mask
if necessary; however, do
NOT
make changes to the subnet mask
unless you have a specific reason to do so� The default setting is
“255�255�255�0”�
3�
DHCP Server
The DHCP server function makes setting up a network very easy by
assigning IP addresses to each computer on the network automatically�
The default setting is “On”� The DHCP server can be turned OFF if
necessary; however, in order to do so you must manually set a static
IP address for each computer on your network� To turn off the DHCP
server, select “Off” and click “Apply Changes”�
4�
IP Pool
The range of IP addresses set aside for dynamic assignment to the
computers on your network� The default is 2–100 (99 computers)� If you
want to change this number, you can do so by entering a new starting
and ending IP address and clicking on “Apply Changes”� The DHCP
server can assign 100 IP addresses automatically� This means that
you cannot specify an IP address pool larger than 100 computers� For
example, starting at 50 means you have to end at 150 or lower so as not
to exceed the 100-client limit� The starting IP address must be lower in
number than the ending IP address�
5�
Lease Time
The length of time the DHCP server will reserve the IP address for each
computer� We recommend that you leave the lease time set to “Forever”�
The default setting is “Forever”, meaning that any time a computer is
assigned an IP address by the DHCP server, the IP address will not
change for that particular computer� Setting lease times for shorter
intervals such as one day or one hour frees IP addresses after the
specified period of time� This also means that a particular computer’s
IP address may change over time� If you have set any of the other
advanced features of the Router such as DMZ or client IP filters, these
are dependent on the IP address� For this reason, you will not want the
IP address to change�
6�
Local Domain Name
The default setting is “Belkin”� You can set a local domain name
(network name) for your network� There is no need to change this setting
unless you have a specific advanced need to do so� You can name the
network anything you want such as “MY NETWORK”�
Page 45 / 106
43
Wireless G Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Viewing the DHCP Client List Page
You can view a list of the computers (known as clients), which are
connected to your network� You are able to view the IP address
(1)
of the
computer, the host name
(2)
(if the computer has been assigned one),
and the MAC address
(3)
of the computer’s network interface card (NIC)�
Pressing the “Refresh”
(4)
button will update the list� If there have been
any changes, the list will be updated�
(1)
(3)
(4)
(2)
Configuring the Wireless Network Settings
Clicking on the header of the “Wireless” tab will take you to the
“Wireless” header page� Under the “Wireless” tab, there are links that
allow you to make changes to the wireless network settings�

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top