Page 76 / 105 Scroll up to view Page 71 - 75
74
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Enabling/Disabling UPnP
UPnP (Universal Plug-and-Play) is yet another advanced feature
offered by your Belkin Router� It is a technology that offers seamless
operation of voice messaging, video messaging, games, and other
applications that are UPnP-compliant� Some applications require the
Router’s firewall to be configured in a specific way to operate properly�
This usually requires opening TCP and UDP ports� An application that
is UPnP-compliant has the ability to communicate with the Router,
basically “telling” the Router which way it needs the firewall configured�
The Router ships with the UPnP feature disabled� If you are using any
applications that are UPnP-compliant, and wish to take advantage of the
UPnP features, you can enable the UPnP feature� Simply select “Enable”
in the “UPnP Enabling” section of the “System Settings” page� Click
“Apply Changes” to save the change�
Enabling/Disabling Auto Firmware Update
This innovation provides the Router with the built-in capability to
automatically check for a new version of firmware and alert you that the
new firmware is available� When you log into the Router’s Web-Based
Advanced User Interface, the Router will perform a check to see if
new firmware is available� If so, you will be notified� You can choose
to download the new version or ignore it� The Router ships with this
feature enabled� If you want to disable it, select “Disable” and click
“Apply Changes”�
Page 77 / 105
75
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
MANUALLY CONFIGURING NETWORK SETTINGS
7
In order for your computer to properly communicate with your Router, you will need to change your PC’s TCP/IP settings to DHCP�
Manually Configuring Network Adapters in Windows 2000, NT, XP, or Vista
1�
Click “Start”, “Settings”, then “Control Panel”�
2�
Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network” icon (Windows XP or Vista)�
3�
Right-click on the “Local Area Connection” associated
with your network adapter and select “Properties” from the
drop-down menu�
4�
In the “Local Area Connection Properties” window, click “Internet
Protocol (TCP/IP)” and click the “Properties” button� The following
screen will appear:
5�
If “Use the following IP address”
(2)
is selected, your Router
will need to be set up for a static IP connection type� Write the
address information in the table below� You will need to enter this
information into the Router�
6�
If not already selected, select “Obtain an IP address automatically”
(1)
and “Obtain DNS server address automatically”
(3)
� Click “OK”�
Your network adapter(s) are now configured for use with the Router�
(1)
(2)
(3)
Page 78 / 105
76
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Adapters in Windows 98SE or Me
1�
Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu�
2�
Select “TCP/IP -> settings” for your installed network adapter� You
will see the following window�
3�
If “Specify an IP address” is selected, your Router will need
to be set up for a static IP connection type� Write the address
information in the table below� You will need to enter this
information into the Router�
4�
Write in the IP address and subnet mask from the “IP Address”
tab
(3)
5�
Click the “Gateway” tab
(2)
� Write the gateway address down in
the chart�
6�
Click the “DNS Configuration” tab
(1)
� Write the DNS address(es) in
the chart�
7�
If not already selected, select “Obtain IP address automatically” in
the “IP Address” tab� Click “OK”�
Restart the computer� When the computer restarts, your network
adapter(s) are now configured for use with the Router�
Set up the computer that is connected to the cable or DSL modem
FIRST using these steps� You can also use these steps to add
computers to your Router after the Router has been set up to connect to
the Internet�
(1)
(3)
(2)
Page 79 / 105
77
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Adapters in Mac OS up to v9�x
In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP�
(1)
(2)
3�
Next to “Configure”
(2)
,
if “Manually” is selected,
your Router will need to
be set up for a static IP
connection type� Write the
address information in the
table below� You will need
to enter this information into
the Router�
4�
If not already set, at “Configure:”, choose “Using DHCP Server”�
This will tell the computer to obtain an IP address from the Router�
5�
Close the window� If you
made any changes, the
following window will
appear� Click “Save”�
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�
1�
Pull down the Apple menu� Select “Control Panels” and
select “TCP/IP”�
2�
You will see the TCP/IP control panel� Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu
(1)
Page 80 / 105
78
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
6
8
9
10
7
MANUALLY CONFIGURING NETWORK SETTINGS
Manually Configuring Network Adapters in Mac OS X
3�
Select “Built-in Ethernet”
(1)
next to “Show” in the “Network” menu�
4�
Select the “TCP/IP” tab
(2)
� Next to “Configure:”
(3)
, you should see
“Manually” or “Using DHCP”� If you do not, check the PPPoE tab
(4)
to make sure that “Connect using PPPoE” is NOT selected� If it
is, you will need to configure your Router for a PPPoE connection
type using your user name and password�
1�
Click on the “System
Preferences” icon�
2�
Select “Network” from the “System Preferences” menu�
(1)
(3)
(4)
(2)

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top