Page 71 / 105 Scroll up to view Page 66 - 70
69
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
2�
Please wait while the Router loads the configuration file� The
Router’s home page should appear automatically� If not, type the
Router’s address (default = 192�168�2�1) into the navigation bar of
your browser�
Updating the Firmware
From time to time, Belkin may release new versions of the Router’s
firmware� Firmware updates contain feature improvements and fixes to
problems that may exist� When Belkin releases new firmware, you can
download the firmware from the Belkin update website and update your
Router’s firmware to the latest version�
Page 72 / 105
70
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Click on “F5D7234-4 Firmware Update” to find and download the latest
firmware available�
Searching for a New Version of Firmware
From http://www�belkin�com/support/, type the Belkin part number
“F5D7234-4” in the “Search” field� Click “Search”�
Updating the Router’s Firmware
In the “Firmware update” page, click “Browse”� A window will open that
allows you to select the location of the firmware update file�
Page 73 / 105
71
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Changing System Settings
The “System Settings” page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on
and off the UPnP function of the Router�
Page 74 / 105
72
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Setting or Changing the Administrator Password
The Router ships with NO password entered� If you wish to add a
password for greater security, you can set a password here� Write down
your password and keep it in a safe place, as you will need it if you need
to log into the Router in the future� It is also recommended that you
set a password if you plan to use the remote management feature of
your Router�
Changing the Login Time-Out Setting
The login time-out option allows you to set the period of time that you
can be logged into the Router’s Web-Based Advanced User Interface�
The timer starts when there has been no activity� For example, you
have made some changes in the Web-Based Advanced User Interface,
then left your computer alone without clicking “Logout”� Assuming the
time-out is set to 10 minutes, then 10 minutes after you leave, the login
session will expire� You will have to log into the Router again to make
any more changes� The login time-out option is for security purposes
and the default is set to 10 minutes�
Note:
Only one computer can be logged into the Router’s Web-Based
Advanced User Interface at one time�
Page 75 / 105
73
G Wireless Router
SECTIONS
Table of Contents
1
2
3
4
5
7
8
9
10
6
USING THE WEB-BASED ADVANCED USER INTERFACE
Setting the Time and Time Zone
The Router keeps time by connecting to a Simple Network Time Protocol
(SNTP) server� This allows the Router to synchronize the system clock
to the global Internet� The synchronized clock in the Router is used
to record the security log and control client filtering� Select the time
zone that you reside in� If you reside in an area that observes daylight
saving, then place a check mark in the box next to “Automatically Adjust
Daylight Saving”� The system clock may not update immediately� Allow
at least 15 minutes for the Router to contact the time servers on the
Internet and get a response� You cannot set the clock yourself�
Enabling Remote Management
Before you enable this advanced feature of your Belkin Router, MAKE
SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD� Remote
management allows you to make changes to your Router’s settings from
anywhere on the Internet� There are two methods of remotely managing
the Router� The first is to allow access to the Router from anywhere
on the Internet by selecting “Any IP address can remotely manage the
Router”� By typing in your WAN IP address from any computer on the
Internet, you will be presented with a login screen where you need to
type in the password of your Router� The second method is to allow a
specific IP address only to remotely manage the Router� This is more
secure, but less convenient� To use this method, enter the IP address
you know you will be accessing the Router from in the space provided
and select “Only this IP address can remotely manage the Router”�
Before you enable this function, it is STRONGLY RECOMMENDED that
you set your administrator password� Leaving the password empty will
potentially open your Router to intrusion�

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top