1.

G.711 A law

2.

G.711 U law

3.

G.729

4.

G.723.3

See the table below for a description of the parameters.

Parameter Description

Support Call Enables or disables support for call waiting. Waiting (Default: Disabled)

Support User-Agent Enables or disables user-agent header support. Enabling this

Header feature includes user agent information in the packet, e.g., the caller’s ID may be

displayed. (Default: Disabled)

Telephony Hook The hook flash timer is the length of time before the hook Flash Timer flash

indicates a time-out (or call disconnect).

(Default: 800 milliseconds.)

Telephony Tone Select the country. Country Setting

Voice Codec Set the voice codecs.

Configuration

• Available Codecs: List of available codecs.

• Selected Codecs: List of selected codecs.

Dialing Plans

Configure the Telephony dialing plans on this page, and click “SAVE SETTINGS.”

Set the Phone Number and Connection Type on this page.

76

Telephony Status

View the Telephony status for both FXS ports on this page. Click “Refresh” to update this

page.

This page displays the Port Type, SIP URL and Registration status of the Belgacom b-box.

See the table below for a description of the parameters.

Parameter

Description

Port Type

Displays the port type, i.e., FXS.

SIP URL

Shows the SIP URL.

Registration

Indicates whether the user has successfully

registered or not.

Telephony Call Logs

View the call log for both FXS ports on this page. Click “Refresh” to update the page.

See the table below for a description of the parameters.

Parameter

Description

Port Type

Displays the port type,

i.e., FXS.

Received

Call

Number of received

calls.

77

Dialed Call

Number of calls made.

Rejected

Call

Number of rejected calls.

Forwarded

Call

Number of forwarded

calls.

Maintenance

Check Backup Router Configuration and click “NEXT” to save your Belgacom b-box’s

configuration to a file named “backup.bin” on your PC.

You can then check Restore from saved Configuration file (backup.bin) to restore the saved

backup configuration file.

To restore the factory settings, check Restore router to Factory Defaults and click “NEXT.” You

will be asked to confirm your decision. Click “APPLY” to proceed, or “CANCEL” to go back.

Firmware Upgrade

Use this screen to update the firmware or user interface to the latest versions.

78

Download the file to your hard drive. Then click Browse... to find the file on your computer. Select

the firmware file and click “Open.” Click “SAVE” to start the upgrade process.

Reset

Perform a reset from this page.

Should your unit become unresponsive for any reason, you can simply perform a reset from this

page. Performing a reset will reboot the device. Your configuration settings will remain the same.

79

Status

The Status screen displays WAN/LAN connection status, firmware and hardware version

numbers, as well as information on DHCP clients connected to your network.

80