9
8
SIGNAL
HD
RECORD
MENU
SMART CARD
OK
HD
Belgacom
network
Telephone
Telephone
Telephone
Telephone
Belgacom
network
Belgacom
network
Telephone
→
If you have
several
5-pole
sockets
and/or one 6-pole socket
page 12
The modem will be installed in another room
than the connection point
2. If the connection point is ready, you can connect your decoder, PC and/or phone
to your modem
General overview of the installation
1. Get your connection point ready
→
If you have
one
5-pole
socket
page 10
The modem will be installed near
the connection point
°e modem's indicator lights
or
page 16
page 22
page 26
only
if you have I-Talk
Adapter
VDSL2 splitter
separate cable
intended only for
connecting
the modem
Internet connection:
if you have ordered this service, this light should be activated after the automatic configuration.
°
is will happen by itself, you do not have to do anything.
Wi-Fi:
wireless network: this logo appears automatically. It shows that your modem is broadcasting a Wi-Fi signal,
whether it is being used or not (you can always turn off
the signal - see page 22).
I-Talk:
Belgacom telephony via your Internet connection. If you have ordered this service, this light should be
activated after Belgacom's automatic configuration. You do not have to do anything.
Television:
this light is only activated if a decoder (working on 220 V) is connected to the modem.
PC:
this light is only activated if you have a PC connected to the modem via an Ethernet cable (yellow connection).
DSL signal:
if it blinks, the modem is synchronising. When it stays activated, the modem is synchronised. Automatic
configuration starts at the fi
rst synchronisation. °e services ordered are available after this automatic configuration.
Power:
if this light comes on, it means that your modem is connected to the mains. If it does not come on: press this
button and/or check that the power supply cable is connected to a 220 V socket.
VDSL2 splitter
Connection point
or
Diffi
cult to use a cable?
In the brochure 'Need help?' you will find more information about using an Ethernet adapter via the mains circuit (PLC).
°is will avoid visible cabling.