Page 26 / 73
Scroll up to view Page 21 - 25
23
IPoA Connection
VPI/VCI:
Enter the VPI and VCI information provided by your ISP.
Encapsulation mode:
Select the encapsulation format. Select the one provided by your ISP.
IP Address:
IPOA WAN IP address can only set fix IP address.
Subnet mask:
User can change it to others such as 255.255.255.128. Type the netmask assigned to
you by your ISP (if given).
Default Gateway:
Enter the IP address of the default gateway.
Page 27 / 73
24
MPoA Connection
VPI/VCI:
Enter the VPI and VCI information provided by your ISP.
Encapsulation mode:
Select the encapsulation format. Select the one provided by your ISP.
IP Address:
Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
Subnet Mask:
User can change it to others such as 255.255.255.128. Type the netmask assigned
to you by your ISP (if given).
Default Gateway:
Enter the IP address of the default gateway.
Pure Bridge connection
VPI/VCI:
Enter the VPI and VCI information provided by your ISP.
Encapsulation mode:
Select the encapsulation format. Select the one provided by your ISP.
Page 28 / 73
25
EWAN Connect Mode
For EWAN connect mode there are 2 types of connection protocols:
PPPoE
and
IPoW
.
PPPoE connection
Username:
Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive). This is in the format of “username@ispname” instead of simply
“username”.
Password:
Enter the password provided by your ISP. You can input up to 32 alphanumeric
characters (case sensitive).
Service Name:
This item is for identification purposes. If it is required, your ISP will provide you
the necessary information. Maximum input is 32 alphanumeric characters.
Authentication method:
Default is Auto. Please consult your ISP on whether to use Chap, Pap or
MSCHAP.
PPP IP Address:
Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
Page 29 / 73
26
IPoW connection
IP Address:
Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to
automatically obtain an IP address from your ISP.
Subnet Mask:
User can change it to others such as 255.255.255.128. Type the netmask assigned to
you by your ISP (if given)
Default Gateway:
Enter the IP address of the default gateway.
19216811.live