Page 16 / 73
Scroll up to view Page 11 - 15
13
Configuring PC in Windows XP
1.
Go to Start > Control Panel (in Classic
View). In the Control Panel, double-click
on Network Connections
2.
Double-click Local Area Connection.
3.
In
the
Local Area
Connection
Status
window, click Properties.
4.
Select Internet Protocol (TCP/IP) and
click Properties.
5.
Select the Obtain an IP address auto-
matically and the Obtain DNS server
address automatically radio buttons.
6.
Click OK to finish the configuration.
Page 17 / 73
14
Configuring PC in Windows 2000
1.
Go to Start > Settings > Control Panel.
In
the
Control
Panel,
double-click
on
Network and Dial-up Connections.
2.
Double-click Local Area Connection.
3.
In
the
Local Area
Connection
Status
window click Properties.
4.
Select Internet Protocol (TCP/IP) and
click Properties.
5.
Select the Obtain an IP address auto-
matically and the Obtain DNS server
address automatically radio buttons.
6.
Click OK to finish the configuration.
Page 18 / 73
15
Configuring PC in Windows 95/98/Me
1.
Go to Start > Settings > Control Panel.
In
the Control Panel, double-click
on
Network and choose the Configuration
tab.
2.
Select TCP/IP > NE2000 Compatible,
or the name of your Network Interface
Card (NIC) in your PC.
3.
Select the Obtain an IP address auto-
matically radio button.
4.
Then select the DNS Configurationtab.
5.
Select
the
Disable
DNS
radio
button
and click OK to finish the configuration.
Page 19 / 73
16
Configuring PC in Windows NT4.0
1.
Go to Start > Settings > Control Panel.
In
the
Control
Panel,
double-click
on
Network and choose the Protocols tab.
2.
Select TCP/IP Protocol and click Prop-
erties.
3.
Select the Obtain an IP address from
a DHCP server radio button and click
OK.
Page 20 / 73
17
Factory Default Settings
Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “
admin
” and “
admin
” respectively.
Device LAN IP settings
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory.
The default values are shown in
the tale.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
The PPPoE function is
enabled to automatically get
the WAN port configuration
from the ISP.
19216811.live