BEC Technologies BEC-7800TN Router Manual PDF (Setup & Configuration Guide)

Page 11 / 73 Scroll up to view Page 6 - 10

8

Cabling

One of the most common causes of problem is bad cabling or ADSL line(s). Make sure that all

connected devices are turned on. On the front panel of your router is a bank of LEDs. Verify that the

LAN Link and ADSL line LEDs are lit. If they are not, verify if you are using the proper cables.

Make sure that all devices (e.g. telephones, fax machines, analogue modems) connected to the same

telephone line as your router have a line filter connected between them and the wall outlet (unless

you are using a Central Splitter or Central Filter installed by a qualified and licensed electrician),

and that all line filters are correctly installed in a right way. If line filter is not installed and connected

properly, it may cause problem to your ADSL connection or may result in frequent disconnections.

Page 12 / 73

9

Chapter 3: Basic Installation

The router can be configured through your web browser. A web browser is included as a standard

application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista,

etc. The product provides an easy and user-friendly interface for configuration.

Please check your PC network components. The TCP/IP protocol stack and Ethernet network

adapter must be installed. If not, please refer to your Windows-related or other operating system

manuals.

There are ways to connect the router, either through an external repeater hub or connect directly to

your PCs. However, make sure that your PCs have an Ethernet interface installed properly prior to

connecting the router device. You ought to configure your PCs to obtain an IP address through a

DHCP server or a fixed IP address that must be in the same subnet as the router. The default IP

address of the router is 192.168.1.254 and the subnet mask is 255.255.255.0 (i.e. any attached PC

must be in the same subnet, and have an IP address in the range of 192.168.1.1 to 192.168.1.253).

The best and easiest way is to configure the PC to get an IP address automatically from the router

using DHCP. If you encounter any problem accessing the router web interface it is advisable to

uninstall your firewall program on your PCs, as they can cause problems accessing the IP address of

the router. Users should make their own decisions on what is best to protect their network.

Please follow the following steps to configure your PC network environment.

Page 13 / 73

10

Connecting Your Router

Users will not be able to connect to the internet through EWAN if DSL is already connected to the

internet. Only one connection type (EWAN or DSL) is allowed to connect to the internet at one

time.

ADSL Router Mode

Broadband Router Mode

Page 14 / 73

11

Network Configuration

Configuring PC in Windows Vista

1.

Go to Start. Click on Network.

2.

Then click on Network and Sharing

Center at the top bar.

3.

When

the

Network

and

Sharing

Center window pops up, select and

click on Manage network connec-

tions on the left window column.

4.

Select the Local Area Connection,

and right click the icon to select

Properties.

Page 15 / 73

12

5.

Select Internet Protocol Version 4

(TCP/IPv4) then click Properties.

6.

In the TCP/IPv4 properties window,

select the Obtain an IP address au-

tomatically and Obtain DNS Server

address

automatically

radio

but-

tons. Then click OK to exit the set-

ting.

7.

Click OK again in the Local Area

Connection

Properties

window

to

apply the new configuration.

Rate

Popular BEC Technologies Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share