BEC Technologies 5200W Router Manual PDF (Setup & Configuration Guide)

Page 11 / 63 Scroll up to view Page 6 - 10

9

2.4 The Rear Ports

5200

5200S

5200G

Port

Meaning

1

PWR

Connect the supplied power adapter to this jack.

2

RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds

: reset the device

6 seconds above

: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

3

LAN

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

four LAN ports when connecting to a PC or an office/home

network of 10Mbps or 100Mbps.

4

ADSL

(LINE)

Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

5

Power

Switch

Power ON/OFF switch

4

3

2

4

2

1

3

1

2

3

4

5

Page 12 / 63

10

2.5 Cabling

One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that

all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that

the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper

cables.

Ensure that all other devices connected to the same telephone line as your BEC router (e.g.

telephones, fax machines, analogue modems) have a line filter connected between them

and the wall socket (unless you are using a Central Splitter or Central Filter installed by a

qualified and licensed electrician), and ensure that all line filters are correctly installed and

the right way around. Missing line filters or line filters installed the wrong way around can

cause problems with your ADSL connection, including causing frequent disconnections

Page 13 / 63

11

Chapter 3

Basic Installation

The router can be configured with your web browser. A web browser is included as a

standard application in the following operating systems: Windows 98/NT/2000/XP/Me, MAC,

Linux, etc. The product provides a very easy and user-friendly interface for configuration.

3.1 Before Configuration

PCs must have an Ethernet interface installed properly and be connected to the router either

directly or through an external repeater hub, and have TCP/IP installed and configured to

obtain an IP address through a DHCP server or a fixed IP address that must be in the same

subnet as the router. The default IP address of the router is

192.168.1.254

and the subnet

mask is

255.255.255.0

(i.e. any attached PC must be in the same subnet, and have an IP

address in the range of 192.168.1.1 to 192.168.1.253). The best and easiest way is to

configure the PC to get an IP address automatically from the router using DHCP. If you

encounter any problems accessing the router’s web interface it may also be advisable to

uninstall

any kind of software firewall on your PCs, as they can cause problems accessing

the 192.168.1.254 IP address of the router. Users should make their own decisions on how

to best protect their network.

Please follow the steps below for your PC’s network environment installation. First of all,

please check your PC’s network components. The TCP/IP protocol stack and Ethernet

network adapter must be installed. If not, please refer to your Windows-related or other

operating system manuals.

Any TCP/IP capable workstation can be used to communicate with or

through the 5200 Series. To configure other types of workstations,

please consult the manufacturer’s documentation.

Page 14 / 63

12

Configuring PC in Windows XP

1.

Go to

Start / Control Panel (in Classic

View)

. In the Control Panel, double-click

on

Network Connections

2.

Double-click

Local Area Connection

.

3.

In the

Local Area Connection Status

window, click

Properties

.

4.

Select

Internet Protocol (TCP/IP)

and

click

Properties

.

5.

Select the

Obtain an IP address

automatically

and

the

Obtain DNS

server address automatically

radio

buttons.

6.

Click

OK

to finish the configuration.

Page 15 / 63

13

Configuring PC in Windows 2000

1.

Go to

Start / Settings / Control Panel

.

In the Control Panel, double-click on

Network

and Dial-up Connections

.

2.

Double-click

Local Area Connection

.

3.

In the

Local Area Connection Status

window click

Properties

.

4.

Select

Internet Protocol (TCP/IP)

and

click

Properties

.

5.

Select the

Obtain an IP address

automatically

and

the

Obtain DNS

server address automatically

radio

buttons.

6.

Click

OK

to finish the configuration.

Rate

Popular BEC Technologies Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share