Page 6 / 63 Scroll up to view Page 1 - 5
4
(ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News,
Net2phone, Ping, NetMeeting, IP phone and others.
Firewall
Supports simple firewall with NAT technology and provides option for blocking access
from Internet, like Telnet, FTP, WEB, SNMP and IGMP.
Domain Name System (DNS) relay
Provides an easy way to map the domain name (a friendly name for users such as
www.yahoo.com) and IP address. When a local machine sets its DNS server with this
router’s IP address, every DNS conversion request packet from the PC to this router
will be forwarded to the real DNS in the outside network.
Dynamic Domain Name System (DDNS)
The Dynamic DNS service allows you to alias a dynamic IP address to a static
hostname. This dynamic IP address is the WAN IP address. For example, to use the
service, you must first apply for an account from a DDNS service like
PPP over Ethernet (PPPoE):
Provides embedded PPPoE client function to establish a
connection.
Users can get greater access speed without changing the operation
concept, sharing the same ISP account and paying for one access account. No PPPoE
client software is required for local computer. The Automatic Reconnect and Disconnect
Timeout (Idle Timer) functions are provided, too.
Virtual Server:
User can specify some services to be visible from outside users. The
router can detect incoming service request and forward it to the specific local computer
to handle it. For example, user can assign a PC in LAN acting as WEB server inside and
expose it to the outside network. Outside user can browse inside web server directly
while it is protected by NAT. A DMZ host setting is also provided to a local computer
exposed to the outside network, Internet.
Users can specify some services to be visible from outside users. The router can
detect incoming service requests and forward either a single port or a range of ports to
the specific local computer to handle it. For example, a user can assign a PC in the
LAN acting as a WEB server inside and expose it to the outside network. Outside users
can browse inside web servers directly while it is protected by NAT. A DMZ host setting
is also provided to a local computer exposed to the outside network, Internet.
Dynamic Host Configuration Protocol (DHCP) client and server
In the WAN site, the DHCP client can get an IP address from the Internet Service
Provider (ISP) automatically. In the LAN site, the DHCP server can allocate a range of
Page 7 / 63
5
client IP addresses and distribute them including IP address, subnet mask as well as
DNS IP address to local computers. It provides an easy way to manage the local IP
network.
RIP1/2 Routing
Supports RIP1/2 routing protocol for routing capability.
Simple Network Management Protocol (SNMP)
It is an easy way to remotely manage the router via SNMP.
Web based GUI
Supports web based GUI for configuration and management. It is user-friendly and
comes with on-line help. It also supports remote management capability for remote
users to configure and manage this product.
Firmware Upgradeable
Device can be upgraded to the latest firmware through the WEB based GUI.
Page 8 / 63
6
1.3 Applications for the 5200 Series
Page 9 / 63
7
Chapter 2
Installing the 5200 Series
2.1 Important note for using the 5200 Series
2.2 Package Contents
5200 Series ADSL2+ Router
RJ-11 ADSL/telephone Cable (1.8M)
Ethernet (CAT-5 LAN) Cable (2M Straight)
AC-DC power adapter (12V DC, 1A)
9
Place the 5200 Series on a stable surface.
9
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
Attention
9
Do not use the 5200 Series in high humidity or high
temperatures.
9
Do not use the same power source for the 5200 Series as
other equipment.
9
Do not open or repair the case yourself.
If the 5200 Series is
too hot, turn off the power immediately and have it repaired at
a qualified service center.
9
Avoid using this product and all accessories outdoors.
Warning
Page 10 / 63
8
2.3 The Front LEDs
5200
5200S
5200G
LED
Meaning
1
PPP :
Lit steady when there is a PPPoA / PPPoE connection.
2
ADSL:
Lit when successfully connected to an ADSL DSLAM
(“linesync”).
3
LAN Port
1-4:
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
4
WLAN
(5200G
only)
Lit green when the wireless connection is established.
Flashes when sending/receiving data.
5
SYS :
Lit when the system is ready.
6
PWR :
Lit when power is ON.

Rate

4 / 5 based on 1 vote.

Popular BEC Technologies Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top