1. Home
    2. /
  2. Manuals
    3. /
  3. Baytec
    4. /
  4. RTA04N
    5. /
  5. 8
Page 36 / 78 Scroll up to view Page 31 - 35
RTA04N User
’
s Manual
Ed.0.1
Page 36 of 78
Beacon Interval:
Enter a value between 20-1000 milliseconds. The Beacon Interval value
indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router to
synchronize the wireless network. The default value is 100.
DTIM Interval:
This value, between 1 and 255, indicates the interval of the Delivery Traffic
Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next
window for listening to broadcast and multicast messages. When the Router has buffered
broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM
Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast
messages. The default value is 1.
Broadcast SSID:
When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router. To broadcast the Router’s
SSID, select “Enable”. If you don’t want to broadcast the Router’s SSID, select “Disable”.
After configuration, click
Apply Changes
button to save your changes.
Note:
1.
These settings are only for more technically advanced users who have a sufficient knowledge
about wireless LAN. They should not be changed unless you know exactly what will happen for
the changes on your Access Point.
2.
After configuration, you need to click the
Save
button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
4.2.3.5. WPS
Choose “
Setup→WLAN→
WPS
” menu, and you will see the Quick Secure Setup screen (shown in
Figure 4-21). Wi-Fi Protected Setup (WPS) is a simple way to establish the connection between the
wireless client and access point. You don’t need to select the encryption method and encryption key.
You just need to input the correct PIN or start PBC and press the WPS button on the router to set
the WPS.
Page 37 / 78
RTA04N User
’
s Manual
Ed.0.1
Page 37 of 78
Figure 4-21
Disable WPS:
Select to disable WPS function.
WPS state:
Display the current WPS state.
Self PIN Number:
Displays the PIN number of the Router. You can click the
Regenerate PIN
button to generate a new PIN number.
Push Button Configuration:
Click
Start PBC
button when using PBC method for WPS
configuration.
1)
PBC
If the wireless adapter supports WPS and the Push Button Configuration (PBC) method, you can
add it to the network by PBC with the following two methods.
Method One:
Step 1:
Press the WPS button on the front panel of the Router or click
Start PBC
button in Figure
4-21.
Step 2:
Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3:
Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
Page 38 / 78
RTA04N User
’
s Manual
Ed.0.1
Page 38 of 78
The WPS Configuration Screen of Wireless Adapter
Method Two:
Step 1:
Press the WPS button on the front panel of the Router or click
Start PBC
button in Figure
4-21.
Step 2:
For the configuration of the wireless adapter, please choose “
Push the button on my
access point
”
in the
configuration utility of the WPS as below, and click
Next
.
The WPS Configuration Screen of Wireless Adapter
Step 3:
Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
Page 39 / 78
RTA04N User
’
s Manual
Ed.0.1
Page 39 of 78
The WPS Configuration Screen of Wireless Adapter
2)
PIN code
If the wireless adapter supports WPS and the PIN method, you can add it to the network by PIN with
the following two methods.
Method One:
Enter the PIN into my Router
Step 1:
For the configuration of the wireless adapter, please c
hoose “
Enter a PIN into my access
point or a registrar
”
in the
configuration utility of the WPS, and get the PIN code on the
screen as below, then click
Next
.
The WPS Configuration Screen of Wireless Adapter
Step 2:
For the Router, enter the PIN code of the wireless adapter in the
Client PIN Number
field
as shown below. Then click
Start PIN
.
Page 40 / 78
RTA04N User
’
s Manual
Ed.0.1
Page 40 of 78
Figure 4-22
Method Two:
Enter the PIN from my Router
Step 1:
Get the Current PIN code of the Router from
Self-PIN Number
in Figure 4-22 (each Router
has its unique PIN code. Here takes the PIN code 12345670 of this Router for example).
Step 2:
For the configuration of the wireless adapter, please c
hoose “
Enter a PIN from my access
point
”
in the
configuration utility of the WPS as below, and enter the PIN code of the
Router into the
Access Point PIN
field. Then click
Next
.

Rate

4.3 / 5 based on 3 votes.

Popular Baytec Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top