Appendix B: Specification

60

Antenna port

Wi-Fi Antenna

Embedded

Wi-Fi External

Antenna

Yes x 1

Router Features

Security

Multiple VPN pass-through (IPSec, PPTP, L2TP), Internet

access restriction, Firewall, DoS Prevention, Traffic and

Event Logging

NAT-NAPT

Port forwarding, Port triggering, DMZ, Multicast

Pass-Through, Static Routing, Dynamic Routing (RIP1,

RIP2), QoS

DNS

DNS Agent, DDNS

ALG Support

Yahoo messenger, AOL messenger, MSN messenger, ICQ,

RealAudio, NetMeeting, Telnet, FTP, Microsoft Traceroute,

Quake, IRC, Microsoft PPTP Client

Other features

IPv4, TCP, UDP, ICMPv4, ARP, DHCP Server/Client,

HTTPs, NTP, TFTP server, MAC Clone, RTP, RTCP,

DiffServ, TOS, SNTP

Browser-based

Administration GUI

Setup Wizard in GUI.

Browser supported: IE, Firefox, Safari, Chrome

Browser-based

Administration GUI

Multi-Language

Support

English

VOIP Function

Voice Telephony

RJ-11 for analog phone, VoIP codec

Voice Signaling

SIP(RFC3261, 3262, 3264)

Wireless LAN

802.11b data rate

1/2/5.5/11 Mbps, Auto or Fixed Rate

802.11g data rate

1/2/5.5/11/6/9/12/18/24/36/48/54 Mbps, Auto or Fixed Rate

802.11n data rate

65/135/270(2x2 MIMO)

Mbps, Auto or Fixed Rate

Security

WPA2/WPA/AES/TKIP, WPA/WPA2 PSK mode,

802.1x

(identify all EAP types supported), None/64/128 bits WEP

Encryption, MAC filter, open system and shared key

authentication, SSID Broadcast Disable, WPS.

Other Functions

Appendix B: Specification

61

Automatic APN / ID /

password settings

Yes

APN updateThrough

browser-based GUI

Yes

Support FW version

upgrade

Yes.

System protection

Password protected system reset to factory default,

Password protected administrator and user access authority

(provisioning, configuration, authentication).

Status Indication

LCD Display

[Status Bar]



Cellular Signal Strength



Radio Technology



Wi-Fi, Ethernet, SIP status



Roaming indication



SMS Notification

[Main Screen]



Network Operator Name



Greetings



WPS Active Mode with count down timer



Time and Date

Accessories

Power adaptor

Supported, Input - 100~240V 50~60Hz AC, output

–

12V/12A

Environment

Operation

Temperature

0°C to 40°C (32°F to 104°F)

Storage Temperature

-20°C to 60°C (-4°F to 140°F)

Operating Humidity

10% to 80% Non-Condensing

Storage Humidity

5% to 90% Non-Condensing

Certification

FCC, GCF conformance

RoHS

Appendix C: Important Safety Information and Glossary

62

Appendix C: Important Safety

Information and Glossary

Europe

–

EU Declaration of Conformity

European Union Notice

Products with CE marking comply with the R&TTE Directive (99/5/EC), the EMC

Directive (2004/108/EC), and the Low Voltage Directive (2006/95/EC) issued by the

Commission of the European Community.

Compliance with these directives implies conformity to the following European

Norms (in parentheses are the equivalent international standards).

EN 60950-1 (IEC 60950-1)

Safety of Information Technology Equipment.

EN 300 328

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

Transmission systems; data transmission equipment operating in the 2.4 GHz

ISM band and using spread spectrum modulation techniques.

EN 301 489-24

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 24: Specific conditions for IMT-2000 CDMA direct spread (UTRA) for mobile and

portable (UE) radio and ancillary equipment.

ETSI EN 301 511

Global system for mobile communications (GSM); Harmonised EN for mobile stations

in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.2

of the R&TTE directive (1995/5/EC).

ETSI EN 301 489-1

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and

services; Part 1: Common technical requirements.

ETSI EN 301 489-7

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 7: Specific conditions for mobile and portable radio and ancillary equipment of

digital cellular radio telecommunications systems (GSM and DCS).

Appendix C: Important Safety Information and Glossary

63

ETSI EN 301 489-17

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 17: Specific conditions for 2.4 GHz wideband transmission systems.

ETSI EN 301 908-1 & -2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS),

Repeaters and User Equipment (UE) for IMT-2000 Third Generation cellular networks;

Part 1: Harmonised EN for IMT-2000, introduction and common requirements,

covering essential requirements of article 3.2 of the R&TTE Directive.

EN 50385

Product standard to demonstrate the compliance of radio base stations and fixed

terminal stations for wireless telecommunication systems with the basic restrictions or

the reference levels related to human exposure to radio frequency electromagnetic

fields (110 MHz - 40 GHz) - General public.

Federal Communication Commission

Interference Statement

15.21

You are cautioned that changes or modifications not expressly approved by the part

responsible for compliance could void the user’s authority to operate the equipment.

15.105(b)

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

Appendix C: Important Safety Information and Glossary

64

1) This device may not cause harmful interference and

2) This device must accept any interference received, including interference that may

cause undesired operation of the device.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 20 centimeters between the radiator and your body.