Page 51 / 66
Scroll up to view Page 46 - 50
Status
50
Router
Firmware Information
Firmware Version:
This is the Router
’s current firmware.
Modem Version:
This is the LTE/3G Module
’s current firmware.
Current Time:
This shows the time, as you set on the Optional tab.
Local Network
Local MAC Address:
This is the Router
’s MAC Address, as seen
by your
ISP
Router IP Address:
The Router
’s IP Address
that appears on your local
network.
Page 52 / 66
Status
51
Subnet Mask:
This shows the current subnet mask being configured for
your local network.
DHCP Server:
The status of the DHCP server function is displayed here.
Clicking the
Change
button displays the
Network Setting
tab.
Start IP Address:
This shows the beginning of the range of IP Addresses
used by devices on your local Ethernet network.
End IP Address:
The end of the range of IP Addresses used by devices
on your local Ethernet network is shown here.
DHCP Client Table:
Click this button to open a screen showing you
which PCs are utilizing the Router as a DHCP server.
WiFi Network
MAC Address:
This is the Router
’
s MAC Address, as seen on your local
wireless network.
Mode:
This displays the wireless mode (802.11b/g/n, 802.11b/g, 802.11b,
802.11g, 802.11n) used by the network.
Network Name (SSID):
This displays the wireless network name or SSID.
Clicking
Change
button displays the
Basic WiFi Network
tab.
Standard Channel:
This displays the channel on which your wireless
network is broadcasting.
Page 53 / 66
Telephony
52
Telephony
VOIP
VOIP
VOIP allows the user to connect a standard analog phone to the router
via the RJ-11 jack and make voice calls over the internet. Use the
information provided by your ISP or VOIP service provider to complete
the relevant fields.
Page 54 / 66
Appendix A: FAQ
53
Appendix A: FAQ
Q: What does the Power LED indicate?
A: The Power LED with solid yellow indicates the Router is on.
Q: How to connect to the Router?
A: 1. Connect an Ethernet cable between the PC/NB and the Router.
2. Use WiFi to connect.
Q: What’s the default “User name” and “Password” for the Router?
A: Please refer to the Quick Start Guide included in the package.
Q: How to enter GUI?
A:
1. Connect PC/NB to the Router.
2. Open Internet Explorer or another Web browser.
3.
Input “
http://
192.168.1.1” (default) or “
http://R500.ROUTER
”
.
4. Input User name and Password.
5. Please refer to the Quick Start Guide included in the package.
Q: How to setup the configuration for the Router?
A:
1. Enter Wizard page to setup.
2. Enter each GUI page to setup.
Q: Why can
’
t I connect to the network via built-in LTE/3G module?
A:
1. Check if the SIM/USIM is inserted well.
2. Check if the type of radio access technology on the screen if the
network is available.
3. Check the subscriber
’
s network operator on the screen if the ISP
name is available.
4. Check if the Status on GUI if the SIM/USIM is detected well.
5. Check if the Status on GUI if the APN it is correct.
Page 55 / 66
Appendix A: FAQ
54
Q: Why can't I link on the GUI?
A: If you have changed your WiFi security, SSID, Local IP address, you
have to repair your network to get a new IP so that you can link the
GUI.
XP:
If you are a WiFi user, click Network Connections and right click on
Wireless Network Connection, click Repair.
If you use Local Area Connection to connect the Router, click
Network Connections and right click on Local Area Connection, click
Repair.
19216811.live