Page 16 / 26
Scroll up to view Page 11 - 15
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 16 -
Connecting the World Now
5. Press “Finish”.
Connection Using USB connection.
After USB driver has been installed, follow following steps to connect to
the 1`xEV-DO network.
1. Open Network Connections
from the Start Menu or
Control Panel.
Page 17 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 17 -
Connecting the World Now
2. Double click “AxessD2”
connection item.
Make sure that the modem
associated with the connection
is “Qualcomm Multimedia USB
Modem”.
2. Enter User name and
Pasword.
z
Check “Save this user…” if
you do not wish to enter the
user name and password
every time you use the EV-
DO modem.
3. On you first use, press
“Properties” button to check if
all settings are correct.
4. Make sure to enter the dial
number as well.
This number
is dependant on the service
provider.
Page 18 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 18 -
Connecting the World Now
3. Check that the correct
modem is select.
4. Check “Show icon in
notification area when
connected”
z
If a wrong modem is select,
connection attempt will fail.
5. Your PC is trying to connect
to the EV-DO network.
If failed check each step of this
section and try again.
Page 19 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 19 -
Connecting the World Now
To disconnect USB connection
1. To disconnect the EV-DO
connection, Select
“Disconnect” from the Tray
Icon Area.
2.
If the tray icon is not visible,
open the “Network
Connections” and select the
“AxessD2” connection item.
3.
Right click on the icon and
select “Disconnect”.
Page 20 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 20 -
Connecting the World Now
Advanced Menu: Web Admin Tool
EV-DO modem provides an embedded Web-based Management Utility.
This utility is operating system independent. Configure your EV-DO
modem by using your Web Browser.
Log In
1. Open your Web browser
address bar as in the
diagram.
z
The default IP address of the
EV-DO modem is
192.168.0.1.
If you change
the IP address of the EV-DO
modem, you will have to
remember the new IP
address in order to get into
this menu.
3. When prompt for User
name and password, enter
admin/admin.
4.
Click on appropriate tab to
access System, Network,
Security, or Status settings.
19216811.live