Page 76 / 89
Scroll up to view Page 71 - 75
WebShare 111/141
A02-RA111 / A02-RA141
Pag. 67
Field
Meaning
New
Firmware
Location
Type in the location of the file you want to upload in
this field or click
Browse
to find it
Browse
Click
Browse...
to find the .ras file you want to
upload. Remember that you must decompress
compressed (.zip) files before you can upload them
Upgrade
Click
UPGRADE
to begin the upload process. This
process may take up to two minutes
After two minutes, log in again and check your new firmware version in the
System Status screen.
If the upload was not successful, the following screen will appear. Click Back to
go back to the Firmware screen.
DO NOT power down the router or interrupt the firmware upgrading while
it is still in process.
Improper operation could damage the router.
Page 77 / 89
WebShare 111/141
A02-RA111 / A02-RA141
Pag. 68
10.4 SysRestart
Click
SysRestart
with option
Current Settings
to reboot your router (and restore
your last saved configuration).
If you wish to restart the router using the factory default settings (for example,
after a firmware upgrade or if you have saved an incorrect configuration), select
Factory Default Settings
to reset to factory default settings.
You may also reset your router to factory settings by holding the small Reset
pinhole button on the back of your router in for 10-12 seconds whilst the router is
turned on.
10.5 Diagnostic
The Diagnostic Test page shows the test results for the connectivity of the
physical layer and protocol layer for both LAN and WAN sides.
Page 79 / 89
WebShare 111/141
A02-RA111 / A02-RA141
Pag. 70
CHAPTER 11: Status
11.1 Device Info
DEVICE INFORMATION:
Field
Meaning
Firmware version
This is the Firmware version
MAC Address
This is the MAC Address
LAN:
Field
Meaning
Page 80 / 89
WebShare 111/141
A02-RA111 / A02-RA141
Pag. 71
IP Address
LAN port IP address
Sub Net Mask
LAN port IP subnet mask
DHCP Server
LAN port DHCP role - Enabled, Relay or disabled
WAN:
Field
Meaning
Status
“Not connected” or “Connected”
Virtual Circuit
There are eight groups of PVC can be defined
VPI:
The valid range for the VPI is 0 to 255
VCI:
The valid range for the VCI is 32 to 65535
Connection Type
Name of the WAN connectio
VPI/VCI
Virtual Path Identifier and Virtual Channel Identifier
IP Address
WAN port IP address
Subnet Mask
WAN port IP subnet mask
Default Gateway
The IP address of the default gateway
DNS Server
WAN port DHCP role - Enabled, Relay or disabled
ADSL:
Field
Meaning
ADSL firmware ver
This is the DSL firmware version associated with
your router
Line State
This is the status of your ADSL lin
Annex Mode
To show the router’s type, e.g. Annex A, Annex B
Max TX Power
This field displays the transmit output power level of
the ADSL Router.
11.2 System Log
Display system logs accumulated up to the present time. You can trace historical
information with this function.
11.3 Statistics
Read-only information here includes port status and packet specific statistics.
Also provided are "Transmit Statistics" and "Receive Statistics".
19216811.live