Page 81 / 106
Scroll up to view Page 76 - 80
79
2
1
3
4
5
6
7
8
9
10
section
Manually Configuring Network Settings
Manually Configuring Network Adapters in Mac OS X
1.
Click on the “System Preferences” icon.
2.
Select “Network”
(1)
from the “System Preferences” menu.
(1)
3.
Select “Built-in Ethernet”
(2)
next to “Show” in the
Network menu.
(2)
(3)
(4)
(5)
Page 82 / 106
Manually Configuring Network Settings
80
4.
Select the “TCP/IP” tab
(3)
. Next to “Configure:”
(4)
, you should see
“Manually” or “Using DHCP”. If you do not, check the PPPoE tab
(5)
to
make sure that “Connect using PPPoE” is NOT selected. If it is, you will
need to configure your Router for a PPPoE connection type using your
user name and password.
5.
If “Manually” is selected, your Router will need to be set up
for a static IP connection type. Write the address information
in the table below. You will need to enter this information into
the Router.
6.
If not already selected, select “Using DHCP” next to “Configure:”
(4)
,
then click “Apply Now”.
Your network adapter(s) are now configured for use with the Router.
Page 83 / 106
In most cases, you will not need to make any changes to your web
browser’s settings. If you are having trouble accessing the Internet or the
Web-Based Advanced User Interface, then change your browser’s settings to
the recommended settings in this section.
Internet Explorer 4.0 or Higher
1.
Start your web browser. Select “Tools” then “Internet Options”.
2.
In the “Internet Options” screen, there are three selections: “Never dial
a connection”, “Dial whenever a network connection is not present”,
and “Always dial my default connection”. If you can make a selection,
select “Never dial a connection”. If you cannot make a selection, go to
the next step.
3.
Under the “Internet Options” screen, click on “Connections” and select
“LAN Settings…”.
81
2
1
3
4
5
6
7
8
9
10
section
Recommended Web Browser Settings
Page 84 / 106
Recommended Web Browser Settings
82
4.
Make sure there are no check marks next to any of the displayed
options: “Automatically detect settings”, “Use automatic configuration
script”, and “Use a proxy server”. Click “OK”. Then click “OK” again in
the “Internet Options” page.
Netscape
®
Navigator
®
4.0 or Higher
1.
Start Netscape. Click on “Edit” then “Preferences”.
2.
In the “Preferences” window, click on “Advanced” then select “Proxies”.
In the “Proxies” window, select “Direct connection to the Internet”.
Page 85 / 106
Problem:
Installation CD does not automatically start.
Solution:
If the CD-ROM does not start the Easy Install Wizard automatically,
it could be that the computer is running other applications that are
interfering with the CD drive.
1.
If the Easy Install Wizard screen does not appear within 15-20
seconds, open up your CD-ROM drive by double-clicking on the “My
Computer” icon that is located on your desktop.
2.
Next, double-click on the CD-ROM drive that the Easy Install Wizard
Software CD has been placed in to start the installation.
3.
The Easy Install Wizard should start within a few seconds. If, instead, a
window appears showing the files on the CD, double-click on the icon
labeled “EasyInstall.exe”.
4.
If the Easy Install Wizard still does not start, reference the section
titled “Manually Configuring Network Settings” (page 76 of this User
Manual) for an alternate setup method.
83
2
1
3
4
5
6
7
8
9
10
section
Troubleshooting
19216811.live