Page 36 / 60
Scroll up to view Page 31 - 35
²6
RT-N15U
Chapter 5: Installing the utilities
±.
Press the WPS button on your router.
3.
On the WPS Wizard, click
Next
to continue.
Notes
:
• When running WPS, the Internet connection pauses briefly then reestablishes the connection.
• If the WPS button is pushed without running the WPS Wizard, the PWR indicator flashes and
Internet connection pauses briefly and then reestablishes the connection.
WPS
WPS button
Page 37 / 60
²7
Chapter 5: Installing the utilities
RT-N15U
4.
Key in desired network name or SSID (service set identifier). When done, click
Next
.
5.
Create and key in a passphrase consisting of 8-6² characters or use the
automatically generated passphrase then click
Next
.
A passphrase is a sentence, phrase, or sequence of alpha-numeric characters
used to generate a security key.
Page 38 / 60
²8
RT-N15U
Chapter 5: Installing the utilities
6. When finished, click
Save or print settings
for future reference or
Save
settings to a USB flash drive
to add other devices to the network. Click
Next
to connect to the Internet.
7.
You have connected to the wireless router. If you want to configure the Internet
settings, click
Setup
. Click
Finish
to close the WPS Wizard.
Note:
For more details on adding devices to the network using a USB flash drive, refer to the
section
Adding network devices using a USB flash drive
on the next page.
Page 39 / 60
²9
Chapter 5: Installing the utilities
RT-N15U
Adding network devices using a USB flash drive
With the WPS utility, you can add devices to your network using a USB flash drive.
To add network devices using a USB flash drive:
1.
In the WPS Wizard, click
Save settings to a USB flash drive
.
2. Insert a USB flash drive into your computer's USB port, then select the drive
from the dropdown list. When done, click
Next
.
Page 40 / 60
³0
RT-N15U
Chapter 5: Installing the utilities
². Unplug the USB flash drive from your computer then insert it to the other
computer that you want to add to your wireless network.
³. Locate
SetupWireless.exe
from the USB drive, and double-click to run it. Click
Yes
to add the computer to the wireless network.
5. Click
OK
to exit the
Wireless Network Setup Wizard
.
19216811.live