±6

RT-N15U

Chapter 4: Configuring via the web GUI

Setting up the wireless router in Repeater mode

In the Repeart mode, the wireless router extends your wireless network coverage

and provides you with higher wireless signal. NAT, firewall, and IP sharing are

disabled.

To set up the wireless router in Repeater mode:

1. From the navigation menu, click

Operation Mode

, select

Repeater mode

, and

click

Save

.

±.

From the network list, select the network that you want to connect to, then click

Connect

.

±7

Chapter 4: Configuring via the web GUI

RT-N15U

Setting up the wireless router in AP mode

In the AP mode, the wireless router receives the WAN IP address from the router

connected to the WAN port and provides you with wireless radio signals. The NAT,

firewall, and IP sharing services are disabled.

To set up the wireless router in AP mode:

1. From the navigation menu, click

Operation Mode

, select

AP mode

, and click

Save

.

±.

From the network list, select the network that you want to connect to, then click

Connect

.

±8

RT-N15U

Chapter 4: Configuring via the web GUI

Upgrading the firmware

Note:

Download the latest firmware from the ASUS website at

To upgrade the firmware:

1. Click

Advanced Setting

from the navigation menu at the left side of your

screen.

±. Under the

Administration

menu, click

Firmware Upgrade

.

². In the

New Firmware File

field, click

Browse

to locate the new firmware on your

computer.

³. Click

Upload

. The uploading process takes about three minutes.

Note:

If the upgrade process fails, use the Firmware Restoration utility to restore the system. For

details on this utility, refer to the section

Firmware Restoration

in Chapter 5 of this user manual.

±9

Chapter 4: Configuring via the web GUI

RT-N15U

Restoring/Saving/Uploading settings

To restore/save/upload the settings:

1. Click

Advanced Setting

from the navigation menu at the left side of your

screen.

±. Under the

Administration

menu, click

Restore/Save/Upload Setting

.

².

Select the tasks that you want to do:

•

To restore to the default factory settings, click

Restore

, and click

OK

in the

confirmation message.

•

To save the current system settings, click

Save

, and click

Save

in the file

download window to save the system file in your preferred path.

•

To restore previous system settings, click

Browse

to locate the system file that

you want to restore, then click

Upload

.

²0

RT-N15U

Chapter 4: Configuring via the web GUI