Page 16 / 60 Scroll up to view Page 11 - 15
16
RT-N15U
Chapter ±: Setting up the hardware
Page 17 / 60
17
Chapter 3: Configuring the clients
RT-N15U
Accessing the wireless router
Setting an IP address for wired or wireless clients
To access the ASUS Wireless Router, you must have the correct TCP/IP settings
on your wired or wireless clients. Ensure that the clients’ IP addresses are within
the same subnet as the ASUS Wireless Router.
By default, the ASUS Wireless Router integrates the DHCP server function, which
automatically assigns IP addresses to the clients in your network.
But in some instances, you may want to manually assign static IP addresses on
some of the clients or computers in your network rather than automatically getting
IP addresses from your wireless router.
Follow the instructions below that correspond to the operating system installed on
your client or computer.
Note
: In the Router mode, if you want to manually assign an IP address to your client, we
recommend that you use the following settings:
IP address
: 19±.168.1.xxx (xxx can be any number between ± and ±5³. Ensure that the IP
address is not used by another device)
Subnet Mask
: ±55.±55.±55.0 (same as the ASUS Wireless Router)
Gateway
: 19±.168.1.1 (IP address of the ASUS Wireless Router)
DNS
: 19±.168.1.1 (ASUS Wireless Router) or assign a known DNS server in your network
3
Configuring the
network clients
Page 18 / 60
18
RT-N15U
Chapter 3: Configuring the clients
Windows
®
2000
1. Click
Start
>
Control Panel
>
Network and Dial-up Connection
.
Right-click
Local Area Connection
then click
Properties
.
±. Select
Internet Protocol (TCP/IP)
,
then click
Properties
.
². Select
Obtain an IP address
automatically
if you want
the IP settings to be assigned
automatically. Otherwise, select
Use the following IP address
: and
key in
IP address
,
Subnet mask
,
and
Default gateway
.
³. Select
Obtain DNS server
address automatically
if you
want the DNS server settings to be
assigned automatically. Otherwise,
select
Use the following DNS
server addresses
: and key in the
Preferred
and
Alternate DNS
server
.
5. Click
OK
when done.
Page 19 / 60
19
Chapter 3: Configuring the clients
RT-N15U
Windows
®
XP
1. Click
Start
>
Control Panel
>
Network Connection
. Right-click
Local Area Connection
then select
Properties.
±. Select
Internet Protocol (TCP/IP)
,
then click
Properties
.
². Select
Obtain an IP address
automatically
if you want
the IP settings to be assigned
automatically. Otherwise, select
Use the following IP address
: and
key in
IP address
,
Subnet mask
,
and
Default gateway
.
³. Select
Obtain DNS server
address automatically
if you
want the DNS server settings to be
assigned automatically. Otherwise,
select
Use the following DNS
server addresses
: and key in the
Preferred and Alternate DNS
server
.
5. Click
OK
when done.
Page 20 / 60
±0
RT-N15U
Chapter 3: Configuring the clients
Windows
®
Vista/7
1. Go to
Start
>
Control Panel
>
Network and Internet
>
Network
and Sharing Center
. Click
View
status > Properties
>
Continue
.
±. Select
Internet Protocol
Version 4 (TCP/IPv4)
, then click
Properties
.
². Select
Obtain an IP address
automatically
if you want
the IP settings to be assigned
automatically. Otherwise, select
Use the following IP address:
and key in
IP address
and
Subnet mask
.
³. Select
Obtain DNS server
address automatically
if you
want the DNS server settings
to be assigned automatically.
Otherwise, select
Use the
following DNS server
addresses:
and key in the
Preferred and Alternate DNS
server
.
5. Click
OK
when done.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top