Page 21 / 56
Scroll up to view Page 16 - 20
±1
Chapter 3: Configuring the clients
RT-N10
4. Select the
DNS
tab then click
Add
under the
DNS Service Search
Order
and key in DNS.
Windows
®
2000
1. Click
Start
>
Control Panel
>
Network and Dial-up Connection
.
Right-click
Local Area Connection
then click
Properties
.
Page 22 / 56
±±
RT-N10
Chapter 3: Configuring the clients
±. Select
Internet Protocol (TCP/IP)
,
then click
Properties
.
². Select
Obtain an IP address
automatically
if you want
the IP settings to be assigned
automatically. Otherwise, select
Use the following IP address
: and
key in
IP address
,
Subnet mask
,
and
Default gateway
.
4. Select
Obtain DNS server
address automatically
if you
want the DNS server settings to be
assigned automatically. Otherwise,
select
Use the following DNS
server addresses
: and key in the
Preferred
and
Alternate DNS
server
.
5. Click
OK
when done.
Page 23 / 56
±²
Chapter 3: Configuring the clients
RT-N10
Windows
®
XP
1. Click
Start
>
Control Panel
>
Network Connection
. Right-click
Local Area Connection
then select
Properties.
±. Select
Internet Protocol (TCP/IP)
,
then click
Properties
.
². Select
Obtain an IP address
automatically
if you want
the IP settings to be assigned
automatically. Otherwise, select
Use the following IP address
: and
key in
IP address
,
Subnet mask
,
and
Default gateway
.
4. Select
Obtain DNS server
address automatically
if you
want the DNS server settings to be
assigned automatically. Otherwise,
select
Use the following DNS
server addresses
: and key in the
Preferred and Alternate DNS
server
.
5. Click
OK
when done.
Page 24 / 56
±4
RT-N10
Chapter 3: Configuring the clients
Windows
®
Vista
1. Go to
Start
>
Control Panel
>
Network and Internet
>
Network
and Sharing Center
. Click
View
status > Properties
>
Continue
.
±. Select
Internet Protocol
Version 4 (TCP/IPv4)
, then click
Properties
.
². Select
Obtain an IP address
automatically
if you want
the IP settings to be assigned
automatically. Otherwise, select
Use the following IP address:
and key in
IP address
and
Subnet mask
.
4. Select
Obtain DNS server
address automatically
if you
want the DNS server settings
to be assigned automatically.
Otherwise, select
Use the
following DNS server
addresses:
and key in the
Preferred and Alternate DNS
server
.
5. Click
OK
when done.
Page 25 / 56
±5
Chapter 4: Configuring via the web GUI
RT-N10
4
Configuring via
the web GUI
Note:
• In the Router mode, the router’s IP address is
192.168.1.1.
• In the AP mode, use Device Discovery included in the support CD to find the router’s IP
address.
Configuring via the web GUI
The router’s web graphics user interface (web GUI) allows you to configure these
features:
Network Map
and
EZQoS Bandwidth Management
.
To access the web GUI:
1.
Launch a web browser, then key in the router’s IP address. The login page of
the router’s web GUI appears.
±.
On the login page, key in the default user name (
admin
) and password
(
admin
).
19216811.live