1. Home
    2. /
  2. Manuals
    3. /
  3. ASUS
    4. /
  4. RT-N10
    5. /
  5. 2
Page 6 / 56 Scroll up to view Page 1 - 5
6
RT-N10
Chapter 1: Knowing your wireless router
1
Knowing your
wireless router
Package contents
Check the following items in your ASUS Wireless Router package.
RT-N10 Wireless Router x1
Power adapter x1
Support CD (manual, utilities) x1
RJ45 cable x1
Detachable antenna x1
Quick Start Guide x1
Note
: If any of the items is damaged or missing, contact your retailer.
System requirements
Before installing the ASUS Wireless Router, ensure that your system/network
meets the following requirements:
•
An Ethernet RJ-45 port (10Base-T/100Base-TX)
•
At least one IEEE 80±.11b/g/n device with wireless capability
•
An installed TCP/IP and Internet browser
Before you proceed
Take note of the following guidelines before installing the ASUS Wireless Router:
•
The length of the Ethernet cable that connects the device to the network (hub,
ADSL/cable modem, router, wall patch) must not exceed 100 meters.
•
Place the device on a flat and stable surface as far from the ground as
possible.
•
Keep the device clear from metal obstructions and away from direct sunlight.
•
Keep the device away from transformers, heavy-duty motors, fluorescent lights,
microwave ovens, refrigerators, and other industrial equipment to prevent
signal loss.
•
Install the device in a central area to provide ideal coverage for all wireless
mobile devices.
Page 7 / 56
7
Chapter 1: Knowing your wireless router
RT-N10
Status indicators
LED
Status
Indication
(Power)
Off
No power
On
System ready
Flashing-slow
Rescue mode
Flashing-quick
WPS processing
AIR
Off
No power
On
Wireless system ready
Flashing
Transmitting or receiving data (wireless)
LAN 1-4 (Local
Area Network)
Off
No power or no physical connection
On
Has physical connection to an Ethernet
network
Flashing
Transmitting or receiving data (through
Ethernet cable)
WAN (Wide
Area Network)
Off
No power or no physical connection
On
Has physical connection to an Ethernet
network
Flashing
Transmitting or receiving data (through
Ethernet cable)
•
Install the device at least ±0cm from a person to insure that the product is
operated in accordance with the RF Guidelines for Human Exposure adopted
by the Federal Communications Commission.
Hardware features
Front panel
RT-N10
150M High Speed
AIR
WAN
LAN1
LAN2
LAN3
LAN4
Page 8 / 56
8
RT-N10
Chapter 1: Knowing your wireless router
Rear panel
Label
Description
WAN
Connect an RJ-45 Ethernet cable to this port to establish
WAN connection.
LAN1-LAN4
Connect RJ-45 Ethernet cables to these ports to establish
LAN connection.
DC IN
Insert the AC adapter into this port to connect your router
to a power source.
WPS
Press this button to establish wireless connection.
Restore
Press this button for more than five seconds to restore the
system to its factory default settings.
WPS
Page 9 / 56
9
Chapter ±: Setting up the hardware
RT-N10
Bottom panel
1
2
Item
Description
1
Mounting hooks
Use the mounting hooks to mount your router on concrete or
wooden surfaces using two round head screws.
2
Air vents
These vents provide ventilation to your router.
Note:
For details on mounting your router on a wall or ceiling, refer to the section
Mounting
options
on the next page of this user manual.
Page 10 / 56
10
RT-N10
Chapter ±: Setting up the hardware
Mounting options
Out of the box, the ASUS Wireless Router is designed to sit on a raised flat surface
like a file cabinet or book shelf. The unit may also be converted for mounting to a
wall or ceiling.
To mount the ASUS Wireless Router:
1.
Look on the underside for the two mounting hooks.
2.
Mark two upper holes in a flat surface.
².
Tighten two screws until only 1/4'' is showing.
4.
Latch the hooks of the ASUS Wireless Router onto the screws.
Note:
Re-adjust the screws if you cannot latch the ASUS Wireless Router onto the screws or if
it is too loose.

Rate

124.8 / 5 based on 304 votes.

Popular ASUS Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top