Page 31 / 56
Scroll up to view Page 26 - 30
²1
Chapter 4: Configuring via the web GUI
RT-N10
Restoring/Saving/Uploading settings
To restore/save/upload the settings:
1. Click
Advanced Setting
from the navigation menu at the left side of your
screen.
±. Under the
Administration
menu, click
Restore/Save/Upload Setting
.
².
Select the tasks that you want to do:
•
To restore to the default factory settings, click
Restore
, and click
OK
in the
confirmation message.
•
To save the current system settings, click
Save
, and click
Save
in the file
download window to save the system file in your preferred path.
•
To restore previous system settings, click
Browse
to locate the system file that
you want to restore, then click
Upload
.
Page 32 / 56
²±
RT-N10
Chapter 5: Installing the utilities
5
Installing
the utilities
±. Click
Next.
Installing the utilities
The support CD contains the utilities for configuring the ASUS Wireless Router.
To install the ASUS WLAN Utilities in Microsoft
®
Windows, insert the support CD
in the CD drive. If Autorun is disabled, run
setup.exe
from the root directory of the
support CD.
To install the utilities:
1. Click
Install...Utilities
.
Page 33 / 56
²²
Chapter 5: Installing the utilities
RT-N10
². Click
Next
to accept the default
destination folder or click
Browse
to
specify another path.
4. Click
Next
to accept the default
program folder or enter another
name.
5. Click
Finish
when setup is
completed.
Page 34 / 56
²4
RT-N10
Chapter 5: Installing the utilities
Device Discovery
Device Discovery is an ASUS WLAN utility that detects an ASUS wireless router
and enables you to configure the device.
To launch the Device Discovery utility:
From your computer’s desktop, click
Start
>
All Programs
>
ASUS Utility
>
RT-N10 Wireless Router > Device Discovery
.
•
Click
Configure
to access the web GUI and configure the wireless router.
•
Click
Search
to search for ASUS wireless routers within range.
•
Click
Exit
to exit the application.
Page 35 / 56
²5
Chapter 5: Installing the utilities
RT-N10
Firmware Restoration
Firmware Restoration is used on an ASUS Wireless Router that failed during its
firmware upgrading process. It uploads the firmware that you specify. The process
takes about three to four minutes.
Note:
This is not a firmware upgrade utility and cannot be used on a working ASUS Wireless
Router. Normal firmware upgrades must be done through the web interface. Refer to
Chapter 4: Configuring via the web GUI
for more details.
To launch the rescue mode and use the Firmware Restoration utility:
1.
Unplug the wireless router from the power source.
±.
Hold the Restore button at the rear panel and simultaneously re-plug the
wireless router into the power source. Release the Restore button when the
Power LED at the front panel flashes slowly, which indicates that the wireless
router is in the rescue mode.
3.
From your computer’s desktop, click
Start > All Programs > ASUS Utility >
RT-N10 Wireless Router > Firmware Restoration
.
Important:
Launch the rescue mode before using the Firmware Restoration utility.
4.
Specify a firmware file, then click
Upload
.
19216811.live