Page 66 / 135
Scroll up to view Page 61 - 65
66
4.2.2 DHCP Server
Your wireless router uses DHCP to assign IP addresses
automatically on your network. You can specify the IP address
range and lease time for the clients on your network.
To configure the DHCP server:
1.
From the navigation panel, go to
Advanced Settings
>
LAN
>
DHCP Server
tab.
2.
In the
Enable the DHCP Server
field, tick
Yes
.
3.
In the
Domain Name
text box, enter a domain name for the
wireless router.
4.
In the
IP Pool Starting Address
field, key in the starting IP
address.
E10302_RT-AC88U_manual.indd
66
2015/5/11
15:40:57
Page 67 / 135
67
5.
In the
IP Pool Ending Address
field, key in the ending IP
address.
6.
In the
Lease Time
field, specify in seconds when an assigned
IP address will expire. Once it reaches this time limit, the DHCP
server will then assign a new IP address.
NOTES:
•
We recommend that you use an IP address format of 192.168.1.xxx
(where xxx can be any number between 2 and 254) when specifying
an IP address range.
•
An IP Pool Starting Address should not be greater than the IP Pool
Ending Address.
7.
In the
DNS and Server Settings
section, key in your DNS
Server and WINS Server IP address if needed.
8.
Your wireless router can also manually assign IP addresses to
devices on the network. On the
Enable Manual Assignment
field, choose
Yes
to assign an IP address to specific MAC
addresses on the network. Up to 32 MAC Addresses can be
added to the DHCP list for manual assignment.
E10302_RT-AC88U_manual.indd
67
2015/5/11
15:40:57
Page 68 / 135
68
4.2.3 Route
If your network makes use of more than one wireless router, you
can configure a routing table to share the same Internet service.
NOTE
:
We recommend that you do not change the default route
settings unless you have advanced knowledge of routing tables.
To configure the LAN Routing table:
1.
From the navigation panel, go to
Advanced Settings
>
LAN
>
Route
tab.
2.
On the
Enable static routes
field, choose
Yes
.
3.
On the
Static Route List
, enter the network information of
other access points or nodes. Click the
Add
or
Delete
button to add or remove a device on the list.
4.
Click
Apply
.
E10302_RT-AC88U_manual.indd
68
2015/5/11
15:40:57
Page 69 / 135
69
4.2.4 IPTV
The wireless router supports connection to IPTV services through
an ISP or a LAN. The IPTV tab provides the configuration settings
needed to set up IPTV, VoIP, multicasting, and UDP for your
service. Contact your ISP for specific information regarding your
service.
E10302_RT-AC88U_manual.indd
69
2015/5/11
15:40:58
Page 70 / 135
70
4.3
WAN
4.3.1 Internet Connection
The Internet Connection screen allows you to configure the
settings of various WAN connection types.
To configure the WAN connection settings:
1.
From the navigation panel, go to
Advanced Settings
>
WAN
>
Internet Connection
tab.
2.
Configure the following settings below. When done, click
Apply
.
•
WAN Connection Type
: Choose your Internet Service
Provider type. The choices are
Automatic IP
,
PPPoE
,
PPTP
,
L2TP
or
static IP
. Consult your ISP if the router is unable
to obtain a valid IP address or if you are unsure the WAN
connection type.
•
Enable WAN
: Select
Yes
to allow the router Internet access.
Select
No
to disable Internet access.
E10302_RT-AC88U_manual.indd
70
2015/5/11
15:40:58
19216811.live