1. Home
    2. /
  2. Manuals
    3. /
  3. ASUS
    4. /
  4. RT-AC88U
    5. /
  5. 13
Page 61 / 135 Scroll up to view Page 56 - 60
61
4.1.4 Wireless MAC Filter
Wireless MAC filter provides control over packets transmitted to
a specified MAC (Media Access Control) address on your wireless
network.
To set up the Wireless MAC filter:
1.
From the navigation panel, go to
Advanced Settings
>
Wireless
>
Wireless MAC Filter
tab.
2.
Tick
Yes
in the
Enable Mac Filter
field.
3.
In the
MAC Filter Mode
dropdown list, select either
Accept
or
Reject
.
• Select
Accept
to allow devices in the MAC filter list to access
to the wireless network.
• Select
Reject
to prevent devices in the MAC filter list to
access to the wireless network.
4.
On the MAC filter list, click the
Add
button and key in the
MAC address of the wireless device.
5.
Click
Apply
.
E10302_RT-AC88U_manual.indd
61
2015/5/11
15:40:57
Page 62 / 135
62
4.1.5 RADIUS Setting
RADIUS (Remote Authentication Dial In User Service) Setting
provides an extra layer of security when you choose WPA-
Enterprise, WPA2-Enterprise, or Radius with 802.1x as your
Authentication Mode.
To set up wireless RADIUS settings:
1.
Ensure that the wireless router’s authentication mode is set to
WPA-Enterprise or WPA2-Enterprise.
NOTE
:
Please refer to section
4.1.1 General
section for configuring your
wireless router’s Authentication Mode.
2.
From the navigation panel, go to
Advanced Settings
>
Wireless
>
RADIUS Setting
.
3.
Select the frequency band.
4.
In the
Server IP Address
field, key in your RADIUS server’s IP
Address.
5.
In the
Server Port
field, key in the server port.
6.
In the
Connection Secret
field, assign the password to access
your RADIUS server.
7.
Click
Apply
.
E10302_RT-AC88U_manual.indd
62
2015/5/11
15:40:57
Page 63 / 135
63
In the
Professional Settings
screen, you can configure the
following:
•
Frequency
:
Select the frequency band that the professional
settings will be applied to.
•
Enable Radio
:
Select
Yes
to enable wireless networking.
Select
No
to disable wireless networking.
•
Date to Enable Radio (weekdays)
:
You can specify which
days of the week wireless networking is enabled.
•
Time of Day to Enable Radio
:
You can specify a time range
when wireless networking is enabled during the week.
4.1.6 Professional
The Professional screen provides advanced configuration options.
NOTE:
We recommend that you use the default values on this page.
E10302_RT-AC88U_manual.indd
63
2015/5/11
15:40:57
Page 64 / 135
64
•
Date to Enable Radio (weekend)
:
You can specify which
days of the weekend wireless networking is enabled.
•
Time of Day to Enable Radio
:
You can specify a time range
when wireless networking is enabled during the weekend.
•
Set AP isolated
:
The Set AP isolated item prevents wireless
devices on your network from communicating with each
other. This feature is useful if many guests frequently join or
leave your network. Select
Yes
to enable this feature or select
No
to disable.
•
Multicast rate (Mbps)
:
Select the multicast transmission
rate or click
Disable
to switch off simultaneous single
transmission.
•
Preamble Type
:
Preamble Type defines the length of time
that the router spent for CRC (Cyclic Redundancy Check). CRC
is a method of detecting errors during data transmission.
Select
Short
for a busy wireless network with high network
traffic. Select
Long
if your wireless network is composed of
older or legacy wireless devices.
•
AMPDU RTS
:
•
RTS Threshold
:
Select a lower value for RTS (Request to
Send) Threshold to improve wireless communication in a
busy or noisy wireless network with high network traffic and
numerous wireless devices.
•
DTIM Interval
:
DTIM (Delivery Traffic Indication Message)
Interval or Data Beacon Rate is the time interval before a
signal is sent to a wireless device in sleep mode indicating
that a data packet is awaiting delivery. The default value is
three milliseconds.
•
Beacon Interval
:
Beacon Interval is the time between one
DTIM and the next. The default value is 100 milliseconds.
Lower the Beacon Interval value for an unstable wireless
connection or for roaming devices.
•
Enable TX Bursting
:
Enable TX Bursting improves
transmission speed between the wireless router and 802.11g
devices.
E10302_RT-AC88U_manual.indd
64
2015/5/11
15:40:57
Page 65 / 135
65
•
Enable WMM APSD
:
Enable WMM APSD (Wi-Fi Multimedia
Automatic Power Save Delivery) to improve power
management between wireless devices. Select
Disable
to
switch off WMM APSD.
•
TX Power adjustment
:
TX Power adjustment refers to the
milliWatts (mW) needed to power the radio signal output of
the wireless router. Enter a value between 0 to 100.
NOTE
:
Increasing the TX Power adjustment values may affect the
stability of the wireless network.
4.2
LAN
4.2.1 LAN IP
The LAN IP screen allows you to modify the LAN IP settings of your
wireless router.
NOTE:
Any changes to the LAN IP address will be reflected on your
DHCP settings.
To modify the LAN IP settings:
1.
From the navigation panel, go to
Advanced Settings
>
LAN
>
LAN IP
tab.
2.
Modify the
IP address
and
Subnet Mask
.
3.
When done, click
Apply
.
E10302_RT-AC88U_manual.indd
65
2015/5/11
15:40:57

Rate

4.5 / 5 based on 2 votes.

Popular ASUS Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top