Page 86 / 135
Scroll up to view Page 81 - 85
86
3.
Enter a word or phrase and click the
Add
button.
4.
Click
Apply
.
NOTES:
•
The Keyword Filter is based on a DNS query. If a network client has
the website will not be blocked (a DNS cache in the system stores
previously visited websites). To resolve this issue, clear the DNS cache
before setting up the Keyword Filter.
•
Web pages compressed using HTTP compression cannot be filtered.
HTTPS pages also cannot be blocked using a keyword filter.
4.6.4 Network Services Filter
The Network Services Filter blocks LAN to WAN packet exchanges
and restricts network clients from accessing specific web services
such as Telnet or FTP.
E10302_RT-AC88U_manual.indd
86
2015/5/11
15:40:59
Page 87 / 135
87
To set up a Network Service filter:
1.
From the navigation panel, go to
Advanced Settings
>
Firewall
>
Network Service Filter
tab.
2.
On the
Enable Network Services Filter
field, select
Yes
.
3.
Select the Filter table type.
Black List
blocks the specified
network services.
White List
limits access to only the specified
network services.
4.
Specify the day and time when the filters will be active.
5.
To specify a Network Service to filter, enter the Source IP,
Destination IP, Port Range, and Protocol. Click the
button.
6.
Click
Apply
.
4.6.5 IPv6 Firewall
By default, your ASUS wireless router blocks all unsolicited
incoming traffic. The IPv6 Firewall function allows incoming traffic
coming from specified services to go through your network.
E10302_RT-AC88U_manual.indd
87
2015/5/11
15:40:59
Page 88 / 135
88
4.7
Administration
4.7.1 Operation Mode
The Operation Mode page allows you to select the appropriate
mode for your network.
To set up the operating mode:
1.
From the navigation panel, go to
Advanced Settings
>
Administration
>
Operation Mode
tab.
2.
Select any of these operation modes:
•
Wireless router mode (default)
: In wireless router mode,
the wireless router connects to the Internet and provides
Internet access to available devices on its own local network.
•
Access Point mode
: In this mode, the router creates a new
wireless network on an exising network.
•
Media Bridge
: This setup requires two wireless routers.
The second router serves as a media bridge where multiple
devices such as Smart TVs and gaming consoles can be
connected via ethernet.
E10302_RT-AC88U_manual.indd
88
2015/5/11
15:40:59
Page 89 / 135
89
3.
Click
Apply
.
NOTE
:
The router will reboot when you change the modes.
4.7.2 System
The
System
page allows you to configure your wireless router
settings.
To set up the System settings:
1.
From the navigation panel, go to
Advanced Settings
>
Administration
>
System
tab.
2.
You can configure the following settings:
•
Change router login password
:
You can change the
password and login name for the wireless router by
entering a new name and
password.
•
Time Zone
:
Select the time zone for your network.
•
NTP Server
:
The wireless router can access a NTP
(Network time Protocol) server in order to synchronize the
time.
•
Enable Telnet
:
Click
Yes
to enable Telnet services on the
network. Click
No
to disable Telnet.
•
Authentication Method
:
You can select HTTP, HTTPS, or
both protocols to secure router access.
•
Enable Web Access from WAN
:
Select
Yes
to allow
devices outside the network to access the wireless router
GUI settings. Select
No
to to prevent access.
E10302_RT-AC88U_manual.indd
89
2015/5/11
15:40:59
Page 90 / 135
90
•
Allow only specified IP address
:
Click
Yes
if you want to
specify the IP addresses of devices that are allowed access to
the wireless router GUI settings from WAN.
•
Client List
:
Enter the WAN IP addresses of networking
devices allowed to access the wireless router settings. This
list will be used if you clicked
Yes
in the
Only allow specific
IP
item.
3.
Click
Apply
.
4.7.3 Firmware Upgrade
NOTE
:
Download the latest firmware from the ASUS website at
To upgrade the firmware:
1.
From the navigation panel, go to
Advanced Settings
>
Administration
>
Firmware Upgrade
tab.
2.
In the
New Firmware File
field, click
Browse
to locate the
downloaded file.
3.
Click
Upload
.
NOTES
:
•
When the upgrade process is complete, wait for some time for the
system to reboot.
•
If the upgrade process fails, the wireless router automatically enters
rescue mode and the power LED indicator on the front panel starts
flashing slowly. To recover or restore the system, refer to section
5.2
Firmware Restoration
.
E10302_RT-AC88U_manual.indd
90
2015/5/11
15:40:59
19216811.live