Page 11 / 79 Scroll up to view Page 6 - 10
Touchstone® WTM552 Telephony Modem User’s Guide
11
Getting
Battery
Wireless
Ethernet
Safety
Started
Installation
Installation
Configuration
Configuration
Usage
Troubleshooting
Glossary
What About Security?
Having a high-speed, always-on connection to the Internet requires a certain
amount of responsibility to other Internet users—including the need to maintain a
reasonably secure system. While no system is 100% secure, you can use the fol-
lowing tips to enhance your system’s security:
Keep your operating system updated with the latest security patches. Run
the system update utility at least weekly.
Keep your email program updated with the latest security patches. In addi-
tion, avoid opening email containing attachments, or opening files sent
through chat rooms, whenever possible.
Install a virus checker and keep it updated.
Avoid providing web or file-sharing services over your Telephony Modem.
Besides certain vulnerability problems, most cable companies prohibit run-
ning servers on consumer-level accounts and may suspend your account for
violating your terms of service.
Use the cable company’s mail servers for sending email.
Avoid using
proxy
software unless you are certain that it is not open for
abuse by other Internet users (some are shipped open by default). Crimi-
nals can take advantage of open proxies to hide their identity when breaking
into other computers or sending spam. If you have an open proxy, your ca-
ble company may suspend your account to protect the rest of the network.
If you use the wireless LAN, make sure you enable wireless security on the
Telephony Modem (for the same reasons that you should run only secured
proxies). See “Wireless Configuration” for help.
Page 12 / 79
Touchstone® WTM552 Telephony Modem User’s Guide
12
Getting
Battery
Wireless
Ethernet
Safety
Started
Installation
Installation
Configuration
Configuration
Usage
Troubleshooting
Glossary
Battery Installation and Replacement
(WTM552G/H Models Only)
WTM552G and WTM552H Telephony Modems may optionally include one of two
types of Lithium-Ion batteries: a 2.2
Amp-hour
(Ah) battery or a 4.4 Ah battery.
For safety and regulatory purposes, the battery is shipped outside of the Telephony
Modem and must be installed.
Identify the battery type using the photos to the left and use the proper installation
procedure:
2.2 Ah Battery Installation and Replacement
4.4 Ah Battery Installation and Replacement
Note:
The 4.4 Ah battery is longer and has a strap between the guides.
To order new or replacement batteries, visit
.
Product IDs are:
2.2 Ah battery: 718003
4.4 Ah battery: 718005
2.2 Ah Battery
4.4 Ah Battery
Page 13 / 79
Touchstone® WTM552 Telephony Modem User’s Guide
13
Getting
Battery
Wireless
Ethernet
Safety
Started
Installation
Installation
Configuration
Configuration
Usage
Troubleshooting
Glossary
2.2 Ah Battery Installation and Replacement
This model of the Telephony Modem has the ability to provide battery backup in the
event of a local power loss. The battery backup is not intended to take the place of
AC power. The 2.2Ah Lithium-Ion battery pack can be inserted into the Telephony
Modem. Use this procedure to install and to replace the backup battery.
Action
1
Insert a finger into the latch opening, press down and pull back on the latch
holding the battery door (on the bottom of the Telephony Modem). Pull the
door toward you. Set the door aside in a safe place.
2
Hold the battery pack so that the guides on the battery align with the slots
on the Telephony Modem and slide the battery into the bay. The diagram on
the left shows the proper orientation. The battery will not insert completely
into the Telephony Modem if not oriented correctly.
Latch
End
Battery Slot
Battery Guide
Page 14 / 79
Touchstone® WTM552 Telephony Modem User’s Guide
14
Getting
Battery
Wireless
Ethernet
Safety
Started
Installation
Installation
Configuration
Configuration
Usage
Troubleshooting
Glossary
3
Push the battery pack into the bay until it seats into place. The following di-
agram shows a Telephony Modem with a 2.2Ah battery pack installed.
If
you are taking the battery out of the unit, position your finger in the
battery opening area and use leverage to dislodge the battery while
pulling it straight back.
Note:
The Telephony Modem will not begin operating until you apply AC
power.
4
Replace the door. To do so, place the hinge tabs of the battery door into the
receiver slots inside the Telephony Modem battery compartment on the op-
posite end of the battery opening slot. Rotate the door toward the unit until
the latch snaps back into place.
Note:
The Lithium-Ion battery pack contains precious material, so there
may be some benefit in recycling. Please dispose of the battery responsibly
and in accordance with local ordinances.
Battery
Opening
Receiver
Slots
Hinge Tabs
Page 15 / 79
Touchstone® WTM552 Telephony Modem User’s Guide
15
Getting
Battery
Wireless
Ethernet
Safety
Started
Installation
Installation
Configuration
Configuration
Usage
Troubleshooting
Glossary
4.4 Ah Battery Installation and Replacement
The 4.4 Ah Lithium-Ion battery pack can be inserted into the Telephony Modem.
Use this procedure to install and to replace the backup battery.
Action
1
Insert a finger into the latch opening, press down and pull back on the latch
holding the battery door (on the bottom of the Telephony Modem). Pull the
door toward you. Set the door aside in a safe place.
2
Hold the battery pack so that the guides on the battery align with the slots
on the Telephony Modem and slide the battery into the bay. The diagram on
the left shows the proper orientation.
Note:
The battery will not insert completely into the Telephony Modem if not
oriented correctly. The battery should slide into the bay without significant
force. Line up the slots in the battery bay with the guides on the battery and
apply even pressure on both ends of the battery.
WRONG
WRONG
RIGHT
Latch
End
Battery Guide
Battery
Pull Strap
Hinge Tabs
Receiver
Slots

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top