Arris SBG7580-AC Router Manual PDF (Setup & Configuration Guide)

Page 46 / 60 Scroll up to view Page 41 - 45

Chapter 8

:

Protecting & Monitoring Your Wireless Network

PN 365-095-30452 x.1

SURFboard SBG7580-AC Wireless Gateway User Guide

.

46

6.

Click the Firewall main menu button on the SBG7580-AC Web Manager menu bar.

7.

Click

PARENTAL CONTROLS

from the Firewall submenu options list to display the Parental

Controls screen.

Figure 31:

Sample Parental Controls Screen

8.

Select the

Enable Parental Controls

checkbox

to turn ON Parental Controls on your home

network.

- or -

Uncheck the

Enable Parental Controls

checkbox to turn OFF Parental Controls on your

home network.

9.

Enter the 12-digit (hexadecimal) Trusted MAC addresses of any connected computers on

your home network in the Trusted MAC Addresses fields and then click

Apply

.

Repeat for each additional MAC address that you want to add.

10.

Click

Add

under Keyword Filtering to add any websites or keywords that you want to

block. The Add Keyword Filter dialog box opens.

Page 47 / 60

Chapter 8

:

Protecting & Monitoring Your Wireless Network

PN 365-095-30452 x.1

SURFboard SBG7580-AC Wireless Gateway User Guide

.

47

Figure 32:

Create Parental Controls Screen

11.

Enter a name for the filter you are creating in the Keyword field.

12.

Select

ALL WEEK

or the specific day(s) that you are setting up for the filter.

13.

Select

ALL DAY

or the specific time that you are setting up for the filter.

The time is based on a 24-hour clock.

Either add a note (go to System Settings screen-

retrieve the router’s time)

.

Note

: Any Parental Control filters that do not include assigned ports will apply to all

ports. This also applies to MAC addresses.

14.

Click

AddKeywordFilter

to create the keyword filter.

Repeat for each additional keyword filter you want to create.

15.

Click

Add

under Web Site Filtering on the Parental Controls screen to add more websites

or names to be blocked. The Add Keyword Filter dialog box opens.

Figure 33:

Create Parental Controls Screen

16.

Click

Apply

, when you are finished.

Page 48 / 60

Chapter 8

:

Protecting & Monitoring Your Wireless Network

PN 365-095-30452 x.1

SURFboard SBG7580-AC Wireless Gateway User Guide

.

48

Set Up IP Filtering

You can use IP Filtering to set up Internet access restrictions on specific network devices on

your home network using their IP addresses. You will have to create IP address filters that

contain the starting and ending IP address range of each device for which you want to block

Internet access.

To configure IP filters:

1.

From any web manager screen, click the

Advanced

menu button on the SBG6700-AC Web

Manager main menu bar.

2.

Click

IP Filtering

from the Advanced submenu options list to display the Advanced IP

Filtering screen.

Figure 34:

Set Up IP Filters Screen

3.

Enter the least significant byte of the starting IP address for the range you are setting up in

the Start Address field.

4.

Enter the least significant byte of the ending IP address for the range you are setting up in

the End Address field.

5.

Select

Enabled

to activate the IP address filter.

6.

Repeat steps 3 thru 5 for each additional range of IP addresses that you want to block

Internet access.

7.

Click

Apply

to create your IP filters.

Page 49 / 60

Chapter 8

:

Protecting & Monitoring Your Wireless Network

PN 365-095-30452 x.1

SURFboard SBG7580-AC Wireless Gateway User Guide

.

49

Set Up MAC Address Filtering

MAC filtering allows you to define up to twenty Media Access Control (MAC) address filters to

prevent computers from sending outgoing TCP/UDP traffic to the WAN via their MAC

addresses. This is useful because the MAC address of a specific NIC card never changes, unlike

its IP address, which can be assigned via the DHCP server or hard-coded to various addresses

over time.

To configure MAC filters:

1.

From any SBG7580-AC Web Manager screen, click the

Wireless 2.4 GHz

or

Wireless 5 GHz

main

menu button

on the

SBG7580-AC Web Manager menu bar.

2.

Click

MAC ADDRESS CONTROL

from the

Wireless

submenu options list to display the MAC

Address Control screen.

Figure 35:

Set Up MAC Filters Screen

3.

Click

Add

from the MAC Address Filter List for the computer you want to allow or block.

4.

Enter the least significant byte of the starting IP address for the range you are setting up.

5.

Select the MAC Address Filter Type from the drop-down list:

o

None

: Allows all wireless devices to connect.

o

Whitelist

: Allows only listed wireless devices to connect.

o

Blacklist

: Allows only wireless devices that are not listed to connect .

6.

Click

Apply

.

7.

Repeat steps 3 thru 6 to add up to 20 MAC addresses.

8.

To delete a MAC address, click on the MAC address in the MAC Address list and then click

Delete.

Repeat for each MAC Address that you want to remove from the MAC Address list.

Page 50 / 60

Chapter 8

:

Protecting & Monitoring Your Wireless Network

PN 365-095-30452 x.1

SURFboard SBG7580-AC Wireless Gateway User Guide

.

50

Set Up Port Triggers

You can use Port Triggers to configure dynamic triggers to specific devices on your LAN. This

allows special applications that require specific port numbers with bi-directional traffic to

function properly. Applications such as video conferencing, voice, gaming, and some

messaging program features may require these special settings.

Note:

If you enable the firewall and set up custom port triggers, then you must configure the

firewall to allow traffic through those custom ports. See

Set Up Firewall Protection

(page

43

)

for more information.

To configure Port Triggers:

1.

From any SBG7580-AC Web Manager screen, click the

Firewall

main

menu button

on the

SBG7580-AC Web Manager menu bar.

2.

Click

PORT TRIGGERS

from the

Firewall

submenu options list to display the Port Triggers

Configuration screen.

Figure 36:

Advanced Port Triggers Screen

3.

Click

Add

button to open the Add Port Trigger screen.

Figure 37:

Add Port Triggers Screen

4.

Enter a name or description for the Port Trigger in the Description field.

5.

Enter the starting and ending port numbers of the Port Trigger range in the Outbound Port

fields.

6.

Select

TCP

,

UDP

, or

BOTH

for the Port Trigger rom the Format drop-down list.

Rate

Popular Arris Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share