Page 881 / 998
Scroll up to view Page 876 - 880
PPPoE command reference
PPPoE
8-111
iMG/RG Software Reference Manual (ADSL Port)
Example
--> pppoe set transport pppoe2 theylogin pap
See also
PPPOE SET TRANSPORT THEYLOGIN
PPPOE SHOW TRANSPORT
PPPOE LIST TRANSPORTS
8.7.4.1.55 PPPOE SHOW TRANSPORT
Syntax
PPPOE SHOW TRANSPORT {<name>|<number>}
Description
This command displays the following information about an existing PPPoE transport:
•
Description
•
Interface number
•
Server - dialin status
•
Headers - the data format that the transport can accept or receive
•
SVC status (false)
•
Local IP address
•
Subnet mask
•
Remote IP address
•
Remote DNS
•
Propagate DNS to client (true or false)
•
Propagate DNS to relay (true or false)
•
Create route (true or false)
•
Specific route (true or false)
•
Route netmask
•
Dialout Username
•
Dialout Password
•
Dialout Authentication method
•
Dialin Authentication method
chap
Challenge Handshake Authentication Protocol
; the server
sends an authentication request to the remote user dialing
in. PAP passes the encrypted username and password and
identifies the remote end.
Page 882 / 998
PPPoE
PPPoE command reference
iMG/RG Software Reference Manual (ADSL Port)
8-112
•
LCP Max Configure
•
LCP Max Failure
•
LCP Max Terminate
•
LCP Echo Every
•
Autoconnect status (true or false)
•
User Idle Timeout setting (in minutes)
•
Access concentrator
•
Service name
•
Port name
•
VPI (PVC transport only)
•
VCI (PVC transport only)
•
Quality of Service (QoS) class (PVC transport only)
•
Peak cell rate (PVC transport only)
•
Burst tolerance (PVC transport only)
•
Sustainable Cell Rate (SCR) (PVC transport only)
•
Maximum burst size (MBS) (PVC transport only)
•
Maximum Cell Rate (MCR) (PVC transport only)
•
Packet Priority Levels setting
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> pppoe show transport
ppp-ext
PPP Transport: ppp-ext
Option
Description
Default Value
name
An existing PPPoE transport. To display transport names,
use the
PPPOE LIST TRANSPORTS
command.
N/A
number
An existing PPPoE transport. To display transport num-
bers, use the
PPPOE LIST TRANSPORTS
com-
mand.
N/A
Page 883 / 998
PPPoE command reference
PPPoE
8-113
iMG/RG Software Reference Manual (ADSL Port)
Description: ppp-ext
Interface ID: 2
Server: false
PPPoE Admin State: true
PPPoE Status: open for IP, sent 130901, received 143026
PPPoE Error Status:
Remote NCP Address: 151.99.57.156
HDLC Headers: false
LLC Headers: false
SVC:
IPv6CP: false
Local IP: 0.0.0.0
Subnet Mask: 255.255.255.255
Discover IPCP Subnet: false
Remote IP: 0.0.0.0
Remote DNS: 0.0.0.0
Propogate DNS to client: false
To relay: true
Create route: true
Specific route: false
Route netmask: 0.0.0.0
Dialout username: MyUsername
Dialout password: MyPassword
Dialout auth.: auto
Dialin auth.: none
LCP Max. Conf.: 10
LCP Max. Failure: 5
LCP Max Terminate: 2
LCP Echo Every: 10
Autoconnect: false
User Idle Timeout: 0
PPP Reconnect Timer: 0
Access Concentrator:
Service Name:
VLAN name:
ATM Port : a1
Tx VPI : 8
Rx VPI : 8
Tx VCI : 35
Rx VCI : 35
Page 884 / 998
PPPoA
PPPoA command reference
iMG/RG Software Reference Manual (ADSL Port)
8-114
ATM Traffic Class : UBR
Peak Cell Rate : 7000
Burst Tolerance : N/A
Sustainable Cell Rate : N/A
Max Burst Size : N/A
Min Cell Rate : N/A
Packet Priority Levels : N/A
See also
PPPOE LIST TRANSPORTS
8.8
PPPoA
8.8.1
PPPoA command reference
8.8.1.1 PPPoA CLI commands
This chapter describes the
PPPoA
commands provided by the CLI:
TABLE 8-8
PPPOA Command
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
PPPOA ADD TRANSPORT DIALIN PVC
X
X
X
PPPOA ADD TRANSPORT DIALOUT PVC
X
X
PPPOA CLEAR TRANSPORTS
X
X
X
PPPOA DELETE TRANSPORT
X
X
X
PPPOA LIST TRANSPORTS
X
X
X
PPPOA SET TRANSPORT AUTOCONNECT
X
X
X
PPPOA SET TRANSPORT BT
X
X
X
PPPOA SET TRANSPORT CREATEROUTE
X
X
PPPOA SET TRANSPORT DIALIN PVC
X
X
X
PPPOA SET TRANSPORT DIALOUT PVC
X
X
X
PPPOA SET TRANSPORT DISCOVERDNS PRIMARY
X
X
X
PPPOA SET TRANSPORT DISCOVERDNS SECONDARY
X
X
X
PPPOA SET TRANSPORT ENABLED|DISABLED
X
X
X
Page 885 / 998
PPPoA command reference
PPPoA
8-115
iMG/RG Software Reference Manual (ADSL Port)
PPPOA SET TRANSPORT GIVEDNS CLIENT
ENABLED|DISABLED
X
X
PPPOA SET TRANSPORT GIVEDNS RELAY
ENABLED|DISABLED
X
X
X
PPPOA SET TRANSPORT HEADERS HDLC
X
X
X
PPPOA SET TRANSPORT HEADERS LLC
X
X
PPPOA SET TRANSPORT IDLETIMEOUT
X
X
X
PPPOA SET TRANSPORT INTERFACE
X
X
X
PPPOA SET TRANSPORT LCPECHOEVERY
X
X
X
PPPOA SET TRANSPORT LCPMAXCONF
X
X
X
PPPOA SET TRANSPORT LCPMAXFAIL
X
X
X
PPPOA SET TRANSPORT LCPMAXTERM
X
X
X
PPPOA SET TRANSPORT LOCALIP
X
X
X
PPPOA SET TRANSPORT MBS
X
X
PPPOA SET TRANSPORT MCR
X
X
X
PPPOA SET TRANSPORT PASSWORD
X
X
X
PPPOA SET TRANSPORT PCR
X
X
X
PPPOA SET TRANSPORT PORT
X
X
X
PPPOA SET TRANSPORT PRILEVELS
X
X
X
PPPOA SET TRANSPORT PVC
X
X
X
PPPOA SET TRANSPORT QOSCLASS
X
X
PPPOA SET TRANSPORT REMOTEDNS
X
X
X
PPPOA SET TRANSPORT REMOTEIP
X
X
X
PPPOA SET TRANSPORT ROUTEMASK
X
X
X
PPPOA SET TRANSPORT SCR
X
X
X
PPPOA SET TRANSPORT SPECIFICROUTE
X
X
X
TABLE 8-8
PPPOA Command
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
19216811.live