1. Home
    2. /
  2. Manuals
    3. /
  3. Allied-Telesis
    4. /
  4. AT-iMG624A
    5. /
  5. 159
Page 791 / 998 Scroll up to view Page 786 - 790
Port a1 command reference
Port a1
8-21
iMG/RG Software Reference Manual (ADSL Port)
Retrain
Enable/disable the automatic full retrain Capabil-
ity. If enabled, the unit will automatically monitor
the following statistics and attempt a full retrain
when the following conditions occur:
OverallFailure status has a non-zero value. This
indicates that one or more failures have occurred
for 2.25 seconds or more.
CRC error rate exceeds 40 per second for 10
consecutive second
Possible values are:
EnableAll, EnableOverallOnly, EnableCrcMinu-
teOnly,
Disable
EnableOverallOnly
RxAutoBinAdjust
Group A and Group C devices
Automatic bin adjustment can be enabled or dis-
abled
Possible values are:
enable: automatically adjusts bin numbers - bin
limitations specified by RxStartBin and RxEndBin
options are ignored
disable: limitations specified by RxStartBin and
RxEndBin options are used.
Disable
RxEndBin
Group A and Group C devices
The highest bin number allowed for the receive
signal can be selected. This allows the customer
to limit bins used for special configurations. For
ADSL2plus, 512downstream bins are utilized.
511
RxStartBin
Group A and Group C devices
The lowest bin number allowed for the receive
signal can be selected. This allows the customer
to limit bins used for special configurations.
6 (AnnexA)
64 (AnnexB)
SHalf
Group A and Group C devices
Enable/Disable SHalf Feature
Enable
TABLE 8-2
Options for ADSL Port Attributes (Continued)
Option
Description
Default Value
Page 792 / 998
Port a1
Port a1 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-22
SRA
Group A and Group C devices
Enables/Disables the Downstream SRA feature
on Bis/Bis+
Possible values are:
Disable, Enable
Disable
ShowtimeLed
To specify which
LED is to be used to
display State.
Possible values are:
0, 1, 2, 3, 4, None
0
Standard
This parameter selects the preferred standard
compliance.
ADSL StandardCompliance to either T1.413,
G992.1 (G.dmt), or G992.2 (G.lite)
Multimodewhere one unit detects the other end
as T1.413, G.lite, G.dmt, G.SPAN.
G.SpanThe following option is to enable High
Speed ADSL DMT applications
ADSL2The following option allows the CPE to
automatically connect in either ADSL Annex A or
ADSL2 mode, depending upon the standard sup-
port of the CO.
ADSL2plusThe following option allows the CPE
to automatically connect in eitherADSL Annex A,
ADSL2 or ADSL2plus mode, depending upon the
standard support of the CO.
Possible values for AnnexA are:
G.Dmt, Bis, BisPlusAuto, BisPlusOnly, G.Span,
G.Span+, G.Span++, t1.413, g.lite, Multimode,
ALCTL_14, ALCATEL_T1413_B, ALCTL, ADI,
G.Dmt.Bis, G.Dmt.BisPlusAuto, G.Dmt.BisPlu-
sOnly.
Possible values for AnnexB are:
G.Dmt, Bis, BisPlusAuto, BisPlusOnly, G.Span,
G.Span+, G.Span++, t1.413, g.lite, Multimode,
ALCTL_14, ALCATEL_T1413_B, ALCTL, ADI
BisPlusAuto
TABLE 8-2
Options for ADSL Port Attributes (Continued)
Option
Description
Default Value
Page 793 / 998
Port a1 command reference
Port a1
8-23
iMG/RG Software Reference Manual (ADSL Port)
StatusFailCount
ONLY Annex A devices group ADSL A and group
ADSL C
0
TxAttenuation
Group A and Group C devices
The user can specify transmit power attenuation.
Possible values are:
Dmt_0DB, Dmt_0.1DB, Dmt_0.2DB,
Dmt_0.3DB, Dmt_0.4DB, Dmt_0.5DB,
Dmt_0.6DB, Dmt_0.7DB, Dmt_0.8DB,
Dmt_0.9DB, Dmt_1DB, Dmt_2DB, Dmt_3DB,
Dmt_4DB, Dmt_5DB, Dmt_6DB, Dmt_7DB,
Dmt_8DB, Dmt_9DB, Dmt_10DB, Dmt_11DB,
Dmt_12DB, Bis_0DB, Bis_0.1DB, Bis_0.2DB,
Bis_0.3DB, Bis_0.4DB, Bis_0.5DB, Bis_0.6DB,
Bis_0.7DB, Bis_0.8DB, Bis_0.9DB
Bis_0DB
TxEndBin
Group A and Group C devices
The highest bin number allowed for the transmit
signal can be selected. This allows the customer
to limit bins used for special configurations
63
TxStartBin
Group A and Group C devices
The lowest bin number allowed for the transmit
signal can be selected. This allows the customer
to limit bins used for special configurations.
6 annexA
33 AnnexB
UtopiaInterface
It specifies the Utopia interface type
Possible values are:
Level1, Level2
Level1
Whip
Parameter to configure the WHIP mode to TCP
or Serial
Possible values are:
Disable, TCP
Disable
TABLE 8-2
Options for ADSL Port Attributes (Continued)
Option
Description
Default Value
Page 794 / 998
Port a1
Port a1 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-24
Example
--> port a1 set
AutoStart true
See also
PORT A1 LIST
PORT A1 SHOW
8.3.1.1.3 PORT A1 SHOW
Syntax
PORT A1 SHOW
Description
This command displays the current attributes and values of ADSL port a1.
Example
AT-iMG634A-R2 device port a1 show
--> port a1 show
DriverVersion
= 1.75
APIVersion
= GS_API_634
FirmwareVersion
= E.25.41.41
A
DspVersion
= 0x00000000
WhipMode
ONLY Group B devices
This parameter can be used to set the WHIP
Possible values are:
WhipOnly (runs only Whip and no APIs), Standa-
lone(disable whip) or Concurrent (run along with
APIs)
Standalone
WriteMemory
ONLY Group B devices
This Parameter acts as a CLI which allows to
write into any DSP memory.
Possible values are:
"0xMemType 0xOffset 0xData”
“\0”
debug
ONLY Group B devices
This parameter enables the debugging of Read/
Write requests to DSP memory.
Possible values are:
disable, readen, writen, rwen
disable
resetDefaults
Possible values are:
true, false
false
TABLE 8-2
Options for ADSL Port Attributes (Continued)
Option
Description
Default Value
Page 795 / 998
Port a1 command reference
Port a1
8-25
iMG/RG Software Reference Manual (ADSL Port)
CommonHandshake
= Enable
Connected
= true
OperationalMode
= ADSL2+
State
= Showtime
Watchdog
= 0x00000053
OperationProgress
= 0x00000000
LastFailed
= 0x00000044
TxBitRate
= 1020100
RxBitRate
= 20476100
DeltACTATPds
= +0.0 dB
DeltACTATPus
= +0.0 dB
DeltHLINscds
= 0
ACTPSDDs
= -46.00 dB
ACTPSDUs
= -50.00 dB
BisTEQError
= -38.40 dB
RxATTNDR
= 21992000
TxATTNDR
= 1100000
AnnexType
= AnnexA
TxCellRate
= 2405
RxCellRate
= 48292
PhyTXCellCount
= 30530
PhyRXCellCount
= 1154939
PhyCellDropCount
= 0
OverallFailure
= 0
InterleaveDpDn
= 64
InterleaveDpUp
= 8
RSCorrectedErrorsDn
= 127
RSUnCorrectedErrorsDn
= 1
RSCorrectedErrorsUp
= 2
RSUnCorrectedErrorsUp
= 1
SuperFramesDn
= 10270882
SuperFramesUp
= 10270882
InterleaveRDn
= 0
InterleaveRUp
= 0
InterleaveSDn
= 0
InterleaveSUp
= 0
FastRDn
= 0
FastRUp
= 0
BisMDn
= 1
BisMUp
= 8
BisBDn
= 242
BisBUp
= 28
BisTDn
= 7

Rate

4 / 5 based on 3 votes.

Popular Allied-Telesis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top