Allied-Telesis AT-iMG624A Router Manual PDF (Setup & Configuration Guide)

Page 781 / 998 Scroll up to view Page 776 - 780

Port a1 command reference

Port a1

8-11

iMG/RG Software Reference Manual (ADSL Port)

AutoSRAMaxTime-

FEC

Group A and group C devices ONLY

AnnexB

AutoSRAUpShiftPe-

riod

Group A and group C devices ONLY

AnnexB

AutoStart

Flag indicating whether the Line should be auto

started or not when the system comes up.

Possible values are:

true: a connection will be established at power up

false: ADSL port a1 will remain in

idle

mode at

power up

true

BisABitSwap

BisBBitSwap

BisMBitSwap

ONLY Group B devices

To Enable/Disable Downsteam BitSwap for Bis/

Bis+

Possible values are:

Disable, Enable

Enable

BisABitSwapUp

BisBBitSwapUp

BisMBitSwapUp

ONLY Group B devices

To Enable/Disable Upsteam BitSwap for Bis/Bis+

Possible values are:

Disable, Enable

Enable

BisACabinetMode

BisBCabinetMode

BisMCabinetMode

ONLY Group B devices

Sets the Cabinet Mode for Bis/Bis+

Possible values are:

Disable, Enable

Enable

(BisA/B)

Disable

(BisM)

BisACapability

BisBCapability

BisMCapability

ONLY Group B devices

Supported A2/A2 capabilities for A2/A2+..

If Disabled line will not try to come in Bis/Bis+

Possible values are:

{A2, A2L, A2+, A2/A2+} (BisA) OR {M2, M2+,

M2+/M2} (BisM) OR {B2, B2+, B2+/B2} (BisB)

AND Disable

A2/A2+ (BisA)

M2+/M2 (BisM)

B2/B2+ (BisB)

TABLE 8-2

Options for ADSL Port Attributes (Continued)

Option

Description

Default Value

Page 782 / 998

Port a1

Port a1 command reference

iMG/RG Software Reference Manual (ADSL Port)

8-12

BisACodingGain

BisBCodingGain

BisMCodingGain

ONLY Group B devices

Configures the Coding Gain in Bis/Bis

Possible values are:

auto, 0, 1, 2, 3, 4, 5, 6, 7

auto

BisADsInp

BisBDsInp

BisMDsInp

ONLY Group B devices

Possible values are:

MinPossible, NextPossible,MaxPossible

MinPossible

BisAEcFdmMode

BisBEcFdmMode

BisMEcFdmMode

ONLY Group B devices

Configures Ec/Fdm Mode for Bis/Bis+

Possible values are:

EC, FDM

EC (BisA/M)

FDM (BisB)

BisAFastRetrain

BisBFastRetrain

BisMFastRetrain

ONLY Group B devices

Configures Fast Retrain on the Line for Bis/Bis+

Possible values are:

Disable, Enable

Disable (BisA/B)

Enable (BisM)

BisAForceSNRMar-

ginDn

BisBForceSNRMar-

ginDn

BisMForceSNRMar-

ginDn

ONLY Group B devices

Parameter to set downstream SNR margin force-

fully at the CPE for Bis/Bis+

Possible values are:

[0, 0x136] or 0xFFFF

0xFFFF

TABLE 8-2

Options for ADSL Port Attributes (Continued)

Option

Description

Default Value

Page 783 / 998

Port a1 command reference

Port a1

8-13

iMG/RG Software Reference Manual (ADSL Port)

BisAFramerType

BisBFramerType

BisMFramerType

ONLY Group B devices

Configures the Framer Type for Bis/Bis+.

There are five different types of framing struc-

tures:

Type0: Full overhead framing with asynchronous

bit-to-modem timing.

Type1: Full overhead framing with synchronous

bit-to-modem timing.

Type2: Reduced overhead framing with separate

fast and sync byte in fast and interleaved latency

buffer respectively.

Type3: Reduced overhead framing with merged

fast and sync byte, using either the fast or the

interleaved latency buffer.

Type3ET: It refers to Databoost (CNXT propri-

etary, b/w CNXT CO & CNXT CPE) enabled on

top

of framing mode - 3.

Possible values are:

Type0, Type1, Type2, Type3,Type3ET

Type3ET

BisAMaxBitsPerBin

BisBMaxBitsPerBin

BisMMaxBitsPerBin

ONLY Group B devices

Configures Maximum Bit per Bin for Bis/Bis+

15

BisAMaxDownRate

BisBMaxDownRate

BisMMaxDownRate

ONLY Group B devices

Configures the Maximum Down Rate for Bis/Bis+

511

BisAMaxInterleaveD

BisBMaxInterleaveD

BisMMaxInter-

leaveD

ONLY Group B devices

Sets the Max interleaved Depth for Bis/Bis+.

Possible values are:

64, 128, 256, 512

511

TABLE 8-2

Options for ADSL Port Attributes (Continued)

Option

Description

Default Value

Page 784 / 998

Port a1

Port a1 command reference

iMG/RG Software Reference Manual (ADSL Port)

8-14

BisAMaxMargin

BisBMaxMargin

BisMMaxMargin

ONLY Group B devices

Configures Maximum SNR Margin for Bis/Bis+

Possible values are:

PerCO, Disable

PerCO

BisAMaxSInverse

BisBMaxSInverse

BisMMaxSInverse

ONLY Group B devices

Limits the number of Code words in a DMT Sym-

bol,

configured for Bis/Bis+

Possible values are:

0x02, 0x03, 0x04, 0x05, 0x06,0x07, 0x08, 0x09,

0x0A,0x0B, 0x0C, 0x0D, 0x0E,0x0F, 0x10

0x10

BisANTRMode

BisBNTRMode

BisMNTRMode

ONLY Group B devices

Possible values are:

Disable, Enable

Disable

BisAPSDMask

BisBPSDMask

BisMPSDMask

ONLY Group B devices

PSD Mask for Bis/Bis+

Possible values are:

Standard, NonOvlp-M1,NonOvlp-M2, NonOvlp-

M1M2,NonOvlp-Flat, ALL

NonOvlp-M1

(BisA/B)

ALL (BisM)

BisAPrecedence

BisBPrecedence

BisMPrecedence

ONLY Group B devices

Sets the Precedence to DSInp/RSDelay for Bis/

Bis+.

DSInp: This setting will maximize the rates, i.e.

during calculation the delay is minimized to

achieve better rates.

RSDelay: This setting gives precedence to the

delay value, i.e. it will result in a relatively larger

delay as compared to the above setting, thus

resulting in a slightly better INP value and may be

slightly lowerrates.

Possible values are:

DSInp, RSDelay

DSInp

TABLE 8-2

Options for ADSL Port Attributes (Continued)

Option

Description

Default Value

Page 785 / 998

Port a1 command reference

Port a1

8-15

iMG/RG Software Reference Manual (ADSL Port)

BisAQualification-

Mode

BisBQualification-

Mode

BisMQualification-

Mode

ONLY Group B devices

Configures Qualification mode for Bis/Bis+

Possible values are:

Mode0, Mode1, Mode2, Mode3, Mode4, Mode5

Mode1

BisARxAutoBinAd-

just

BisBRxAutoBinAd-

just

BisMRxAutoBinAd-

just

ONLY Group B devices

Possible values are:

Disable, Enable

Disable

BisARxEndBin

BisBRxEndBin

BisMRxEndBin

ONLY Group B devices

Configures Rx End Bin for Bis/Bis+

511

BisARxStartBin

BisBRxStartBin

BisMRxStartBin

ONLY Group B devices

Configures Rx Start Bin for Bis/Bis+

6 (BisA/M)

64 (BisB)

BisASHalf

BisBSHalf

BisMSHalf

ONLY Group B devices

Enable/Disable SHalf Feature on Bis/Bis+.

Possible values are:

Disable, Enable

Disable

BisAStandard

BisBStandard

BisMStandard

ONLY Group B devices

No longer considered in Solos family.

BisATxAttenuation

BisBTxAttenuation

BisMTxAttenuation

ONLY Group B devices

Configures Tx Attenuation for Bis/Bis+

Possible values are:

Dmt_0DB,Dmt_0.1DB to Dmt_0.9DB to

Dmt_1DB to Dmt_12DB, Bis_0DB, Bis_0.1DB

to Bis_0.9DB, Bis_13DB to Bis_40DB

Bis_0DB

TABLE 8-2

Options for ADSL Port Attributes (Continued)

Option

Description

Default Value

Rate

Popular Allied-Telesis Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share