Page 206 / 211 Scroll up to view Page 201 - 205
Specifications
B.2
LED Indicators
B
206
© 2010 Verizon. All Rights Reserved.
B.2
LED Indicators
Power, WAN Ethernet, WAN Coax, Internet, LAN Ethernet (4), LAN Coax, USB,
Wireless, WPS
B.3
Environmental
Dimensions
Size
: 1.875” x 10” x 7.4”
Weight
: 2.175 lbs.
Power
External, 10V DC, 1.6A (Adapter Technology Co., Ltd.; model #: STD 10016U)
Certifications
FCC Part 15, UL-60959-1
Operating Temperature
0º C to 40º C (32º F to 104º F)
Storage Temperature
-20º C to 70º C (-4º F to 158º F)
Operating Humidity
8% to 93% (non-condensing)
Storage Humidity
5% to 100% (non-condensing)
Page 207 / 211
207
© 2010 Verizon. All Rights Reserved.
C
Notices
C.0
Introduction
C.1
Regulatory
Compliance Notices
C.2
Modifications
C.3
NEBS Requirements
C.4
GPL
Page 208 / 211
208
© 2010 Verizon. All Rights Reserved.
This appendix lists various compliance and
modification notices, as well as the NEBS
requirements and GPL.
Page 209 / 211
FiOS Router User Manual
209
© 2010 Verizon. All Rights Reserved.
C.1
Regulatory Compliance Notices
Class B Equipment
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by implementing one or more of
the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment to an outlet on a circuit different from the one to
which the receiver is connected;
Consult the dealer or an experienced radio or television technician for help.
C.2
Modifications
The FCC requires the user to be notified that any changes or modifications made
to this device that are not expressly approved by Actiontec Electronics, Inc., may
void the user’s authority to operate the equipment.
Declaration of conformity for products marked with the FCC logo – United
States only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference;
1.
Page 210 / 211
Specifications
C.2
Modifications
C
210
© 2010 Verizon. All Rights Reserved.
This device must accept any interference received, including interference
2.
that may cause unwanted operation.
Note:
To comply with FCC RF exposure compliance requirements, the antenna
used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
For questions regarding your product or the FCC declaration, contact:
Actiontec Electronics, Inc.
760 North Mary Ave.
Sunnyvale, CA 94085
United States
Tel: (408) 752-7700
Fax: (408) 541-9005

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top