Page 16 / 123
Scroll up to view Page 11 - 15
11
Chapter 2
Performing a Quick Setup
Changing the Password
To create or change the password allowing access to the Gateway’s Web
Configuration screens, follow these instructions:
1.
From the “Home” screen, select
Security
.
2.
The “Security” screen appears. Select “Admin User Name and Password.”
3.
The “Change Admin Username/Password” screen appears. Enter a new
Username in the “Admin User Name” text boxt, then enter a new password in
the “Admin Password” text box. Make sure to write down the user name and
password and keep it in a secure location. They will be needed to access the
Gateway’s Web Configuration screens in the future.
4.
Click
Apply
at the bottom of the screen.
5.
Read the instructions on the next screen. The user name and password are
successfully changed.
Once the Gateway has rebooted, the new user name and password are active. To
access the Gateway’s Web Configuration screens, the new user name and password
must be entered.
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 123
12
Action
tec 54 Mbps Wireless DSL Gateway User Manual
This page left intentionally blank.
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 123
13
Viewing the
Gateway’s Status
After configuring the Gateway, the Gateway’s connection and network status can
be viewed. The Internet connection status is viewed in the “Broadband Connection
Status” screen, while the network status is viewed in the “My Network” screen.
Broadband Connection Status
To view the Gateway’s connection statistics, select
Status
in the Home screen. The
“Broadband Connection Status” screen appears.
There are three sections in this
screen: General Statistics, PPP Status, and DSL Status.
☞
Note:
No settings (other than connecting or disconnecting from
the Internet by clicking on
Connect
or
Disconnect
) can be
changed from the Broadband Connection Status screen.
General Statistics
The top section of the Broadband Connection Status screen displays general statis-
tics regarding the Gateway, including model number, firmware version, IP address,
and gateway IP address.
3
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 123
14
Actiontec 54 Mbps Wireless DSL Gateway User Manual
PPP Status
The middle section of the Broadband Connection Status screen displays the status
of the Gateway’s PPP connection, including user name, authentication failures,
and packets sent and received.
DSL Status
The bottom section of the Broadband Connection Status screen displays the status
of the Gateway’s DSL connection, including mode settings, connection status, and
number of discarded packets. Click
Reset
to refresh all statistics on this screen
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 123
15
Chapter 3
Viewing the Gateway’s Status
In the menu on the left side of the Broadband Connection Status screen, there are
two other options available to view:
NAT Table
and
Routing Table
. Click to gen-
erate
the option of choice.
NAT Table
Selecting
NAT Table
generates the “NAT Table” screen. This screen displays an overview
of the current list of open connections through
NAT
(Network Address Translation) the
Gateway supports between the networked computers and the Internet.
ARP Table
Selecting
ARP Table
generates the “ARP Table” screen. This screen displays the an
overview of the Gateway’s network routes.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live