Page 11 / 123
Scroll up to view Page 6 - 10
6
Action
tec 54 Mbps Wireless DSL Gateway User Manual
Power Port
The Power port is used to connect the Power cord to the Gateway.
N
Warning
:
Do not unplug the Power cord from the Gateway
during the reset process. Doing so may result in permanent
damage to the Gateway.
Power Switch
The Power switch is used to power the Gateway on and off.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 123
7
Performing a
Quick Setup
This chapter is a guide through a quick set up of the Gateway, including how to
connect the Gateway to the
ISP
.
To complete the quick setup, have the Welcome Letter or
ISP
Worksheet handy. If
the document is not available, contact the
ISP
immediately.
Accessing Quick Setup Screens
To access the Quick Setup screens:
1.
Open a Web browser. In the “Address” text box, type:
then press
Enter
on the keyboard.
2
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 123
8
Action
tec 54 Mbps Wireless DSL Gateway User Manual
2.
The “Home” screen appears. Click
Quick Setup
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 123
9
Chapter 2
Performing a Quick Setup
3.
A login window appears. Enter the user name and password in the appropri-
ate text boxes, then click
OK
.
☞
Note:
The default user name is “admin.” The default password is
“password.”
4.
Follow the instructions in the “Welcome to the Quick Setup” screen, then click
Next
.
5.
At the top of the next window, select
PPPoE
or
DHCP
.
5a.
If
PPP
o
E
was selected in step 5,
the default user name and password are
entered in the appropriate text boxes.
If “
DHCP
” was selected, go to step 6.
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 123
10
Action
tec 54 Mbps Wireless DSL Gateway User Manual
5b.
If
PPP
o
E
was selected in step 5,
select the
IP
type (“Dynamic
IP-DHCP
[Default]” or “Single Static
IP
Address”). If Single Static
IP
Address was select-
ed, enter the address in the appropriate text box.
6.
Optional
- Select the
DNS
type (“Dynamic
DNS
Addresses [Default]” or
“Static
DNS
Addresses”). If Static
DNS
Addresses was selected, enter the pri-
mary and secondary
DNS
addresses in the appropriate text boxes. If unsure
what to enter in this section, contact the
ISP
.
7.
Click
Apply
at the bottom of the screen.
8.
Read the instructions on the next screen. The Gateway is successfully
configured.
The Power light flashes rapidly while the Gateway restarts, then glows steadily
green when fully operational. The Internet light will also glow steadily green. The
Gateway is now configured and users can start surfing the Internet.
If an error appears, stating the Web browser was unable to connect to the Internet,
check the configuration settings. Ensure all the information required by the
ISP
is
entered correctly.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live