Page 91 / 123
Scroll up to view Page 86 - 90
86
Action
tec 54 Mbps Wireless DSL Gateway User Manual
3.
Another menu appears. Select
Control Panel
.
4.
When the “Control Panel” window appears, double-click
Network
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 92 / 123
87
Appendix B
Switching to Static IP on the Computer
5.
The “Network” window appears. In the “The following network components
are installed” list box, locate and double-click
TCP/IP
.
6.
The “
TCP/IP
Properties” window appears. Select
IP
Address
.
7.
In the
IP
Address tab, make sure the the circle next to “Specify an
IP
Address”
is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
8.
Enter the following numbers in the “
IP
Address” text box:
192.168.1.2
Do not include the periods; they are automatically entered.
Downloaded from
www.Manualslib.com
manuals search engine
Page 93 / 123
88
Action
tec 54 Mbps Wireless DSL Gateway User Manual
9.
Enter the following numbers in the “Subnet mask” text box:
255.255.255.0
Do not include the periods; they are automatically entered.
10.
Click
OK
. The
TCP/IP
Properties window disappears.
11.
In the Network window, click
OK
. The Network window disappears.
12.
The “System Settings Change” window appears, asking whether the computer
should be restarted. Click
Yes
.
The computer restarts. It is now set up with a static
IP
address, allowing the user to
access the Gateway’s Web Configuration Utilities (Advanced Setup, Utilities, etc.).
Windows Me
1.
From the desktop, click
Start
in the lower left corner.
2.
From the menu that appears, select
Settings
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 94 / 123
89
Appendix B
Switching to Static IP on the Computer
3.
Another menu appears. Select
Control Panel
.
4.
When the “Control Panel” window appears, double-click
Network
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 95 / 123
90
Action
tec 54 Mbps Wireless DSL Gateway User Manual
5.
The “Network” window appears. In the “The following network components
are installed” list box, locate and double-click
TCP/IP
.
6.
The “
TCP/IP
Properties” window appears. Click
IP
Address
.
7.
In the “
IP
Address” tab, make sure the the circle next to “Specify an
IP
Address” is selected. When active, a black dot appears in the circle. If the circle
already contains a black dot, leave it alone.
8.
Enter the following numbers in the “
IP
Address” text box:
192.168.1.2
Do not include the periods; they are automatically entered.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live