Page 6 / 23
Scroll up to view Page 1 - 5
Actiontec F2250 Setup Guide
Date: 12/13/2013
Actiontec_F2250_Setup_Guide.docx
Page
6
of
23
Setup Guide: Residential, Dynamic and Static Business,
Continued
Initial
provisioning
(continued)
Step
Action
8
The Wizard will now attempt to establish a connection to the
Internet. The following screen will appear for a short time.
IF
you
receive the screen shown below…C
lick:
Retry
Note: DSL must be up and trained for this step to be successful.
Continued on next page
Page 7 / 23
Actiontec F2250 Setup Guide
Date: 12/13/2013
Actiontec_F2250_Setup_Guide.docx
Page
7
of
23
Setup Guide: Residential, Dynamic and Static Business,
Continued
Initial
provisioning
(continued)
Step
Action
9
Once an Internet connection has been established and
authentication is complete the Summary page will be displayed.
This Summary page can be saved or printed, however you
must
click
Next
in order to complete the installation process.
The browser will be redirected to the Frontier Welcome Page.
Click:
Next
Continued on next page
Page 8 / 23
Actiontec F2250 Setup Guide
Date: 12/13/2013
Actiontec_F2250_Setup_Guide.docx
Page
8
of
23
Setup Guide: Residential, Dynamic and Static Business,
Continued
Initial
provisioning
(continued)
Step
Action
10
Residential HSI install: Complete E-signature page.
Business HSI install: E-signature page is not used.
11
The next step depends on whether the Setup Wizard skipped the
Username/Password screen back on
Initial provisioning
, page 5
Was User/Pass screen
skipped?
Go to…
No
Next step (step 12)
Yes
Fixing connection type
(p18)
12
The next step depends on the type of install.
Residential HSI…………………Go to
Verify service
(page 17)
Dynamic Business Class HSI…..Go to
Verify service
(page 17)
Static Business Class HSI……
....
Go to
Remote access
(page 9)
Continued on next page
Page 9 / 23
Actiontec F2250 Setup Guide
Date: 12/13/2013
Actiontec_F2250_Setup_Guide.docx
Page
9
of
23
Setup Guide: Residential, Dynamic and Static Business,
Continued
Remote access
Step
Action
1
Direct your browser to:
2
You may
be prompted for the modem’s Administrator Username
and Password as determined in
Initial provisioning: Step 4
section above.
Username:
admin
Password:
fr0nt13r
3
Click:
Advanced
in the top menu bar.
4
Click:
Remote GUI
in the left hand navigation window.
Continued on next page
Page 10 / 23
Actiontec F2250 Setup Guide
Date: 12/13/2013
Actiontec_F2250_Setup_Guide.docx
Page
10
of
23
Setup Guide: Residential, Dynamic and Static Business,
Continued
Remote access
(continued)
Step
Action
5
Click:
Enable
C
lick:
Apply
6
Remove the default information and enter the following:
Remote User Name:
remoteadmin
Remote Password:
f+rR3m0te
f plus r R 3 m zero t e
Click:
Apply
7
Static Business Class
HSI……..
Go to
Static LAN setup
(page 11)
Continued on next page
19216811.live