Page 91 / 132
Scroll up to view Page 86 - 90
Configuring LAN Devices
87
4.
Click
IP Address Allocation
; a page similar to the following opens, displaying the devices in your
network.
5.
Go to the intended device and select the following to override the default DHCP settings:
−
Select the address or address pool from which you want to select an IP address from the
WAN IP
Mapping
drop-down list.
−
Select the specific address or address type to assign from the
Address Assignment
drop-down list.
6.
Click
Save
.
Page 92 / 132
iNID -- i3812V User Guide
88
Selecting DSL Lines
The default DSL line selection is
Dual
for bonded lines. Changing the DSL line to Line 1 or Line 2 will
terminate your Internet connection. To reconnect, you need to change the DSL line selection to
Dual
then
reboot the unit.
1.
Open a Web browser and enter
to access the 2Wire i3812V user interface, the
Home
page opens.
2.
Click
, the
Broadband Status
page opens.
Note:
Do not change the DSL line unless instructed by your service provider.
Doing so will terminate your Internet connection.
Page 93 / 132
Configuring LAN Devices
89
3.
Click
Link Configuration
; the following page opens.
4.
Select the intended DSL line from the
DSL Line Selection
drop-down list.
5.
Click
Save
.
Page 94 / 132
iNID -- i3812V User Guide
90
Page 95 / 132
91
Finding Solutions
The i3812V comes with diagnostics tools, such as link test, DSL, IP PING, trace route, DNS query, and so
forth. This section provides helpful information to solve common issues. It also provides instructions to
view various statistics and logs.
•
Connection issues on
page 92
•
VoIP issues on
page 94
•
iPSU issues on
page 95
•
System issues on
page 95
•
DSL bandwidths information on
page 96
•
Voice service information on
page 98
•
Wireless AP statistics on
page 101
•
LAN status on
page 102
•
HPNA performance tests on
page 105
•
HPNA COAX and phones statistics on
page 111
•
Logs on
page 114
19216811.live