Page 86 / 132
Scroll up to view Page 81 - 85
iNID -- i3812V User Guide
82
this communication, you cannot modify the related DHCP settings. The i3812V is a DHCP server to your
local network devices such as the i38HG and computers connecting to it.
To configure the default DHCP information used as a local server:
1.
Open a Web browser and enter
to access the 2Wire i3812V user interface; the
Home
page opens.
Page 87 / 132
Configuring LAN Devices
83
2.
Click
Settings
; the
System Information
page opens.
3.
Click
LAN
; a page similar to the following opens, displaying the private network information and LAN
devices connected to your network.
Page 88 / 132
iNID -- i3812V User Guide
84
4.
Click
DHCP
; the
DHCP Configuration
page opens.
5.
Select
Configure manually
if you want to set up a range for the DHCP address IP pool.
6.
Enter information in the following fields:
−
Router Address
: This is the IP address of your i3812V used for all communication on your local
devices.
−
Subnet Mask
: This is the subnet mask used for all communication on your local devices (the default
is 255.255.255.0).
−
First DHCP Address
: The first IP address in the DHCP address pool that you will be distributing over
the private network.
−
Last DHCP Address
: The last IP address in the DHCP address pool that you will be distributing over
the private network.
7.
Enter a numerical value in the
DHCP Lease Time
field. This value represents the number of hours you
can use the assigned IP address before the DHCP lease expires.
8.
Select a public IP address pool that is assigned via DHCP on the local area network.
Page 89 / 132
Configuring LAN Devices
85
9.
Click
Save
.
Allocating IP Addresses
You can allocate specific IP addresses to devices that are running in the DHCP mode, and map devices to
particular static (public) or private IP addresses. For Internet public hosting of application or servers
associated with static addresses, you can map a device to a specific public fixed IP address or to the next
unassigned address from the public pool. The default public IP device mapping is to the Router WAN IP
address.
1.
Open a Web browser and enter
to access the 2Wire i3812V user interface, the
Home
page opens.
Note:
Change to the Public IP address only when used in conjunction with
DMZplus or secondary subnet functionality that allows you to have public IP
addresses routed through the device.
Note:
Alternatively, you may also statically configure public or private IP
addresses on the device themselves. Statically addressed device addresses
override settings made on this page.
Page 90 / 132
iNID -- i3812V User Guide
86
2.
Click
Settings
; the
System Information
page opens.
3.
Click
LAN
; a page similar to the following opens, displaying the private network information and LAN
devices connected to your network.
19216811.live