Management and Diagnostic Console

71

Local Network - Status Page

The Local Network – Status page shows the status of the local network.

Figure 29. MDC Local Network Status Page

The Local Network – Status page includes the following information:

Item

Description

IP

Gateway

The IP address allocated to the 2Wire gateway.

IP Network

The IP address used by the network.

Subnet Mask

The subnet mask allocated to the 2Wire gateway.

DHCP Range

The range of IP addresses available on the network, the

number of addresses Allocated, and the number of

addresses Remaining.

Management and Diagnostic Console

72

DHCP Timeout

The time, in minutes, before the DHCP lease must be

renewed.

Devices

Ethernet

The number of Active and Inactive Ethernet devices on

the network.

Wireless (802.11)

The number of Active and Inactive wireless devices on the

network.

USB

Specifies whether a USB device is present (Active) on the

network. If a USB device is not present, the value is

Inactive.

Public Network

Router Address

Defines a separate network on the home side.

Subnet Mask

The subnet mask allocated for public address.

Bridge Network

Router Address

Creates a bridge network with the broadband.

Subnet Mask

The subnet mask allocated for public address.

Note:

If you have Enhanced Services (such as Internet Access Control) installed, the specific

service and its status display in the Devices panel.

Item

Description

Management and Diagnostic Console

73

Local Network - Statistics Page

The Local Network – Statistics page shows information about the interfaces on the local network.

Figure 30. MDC Local Network Statistics Page

The Local Network – Statistics page includes the following information:

Item

Description

Ethernet

Transmit

The cumulative number of frames transmitted over the

Ethernet home network interface, the number of payload

bytes transmitted, and the number and percentage of

transmitted packets in error.

Management and Diagnostic Console

74

To reset the local network statistics, click the

Reset

button.

Receive

The cumulative number of frames received over the

Ethernet home network interface, the number of payload

bytes received, and the number and percentage of

received packets in error.

Wireless (this field is present only on wireless 2Wire gateway models)

Transmit

The cumulative number of frames transmitted over the

wireless home network interface, the number of payload

bytes transmitted, and the number and percentage of

transmitted packets in error.

Receive

The cumulative number of frames received over the

wireless home network interface, the number of payload

bytes received, and the number and percentage of

received packets in error.

USB

Transmit

The cumulative number of frames transmitted over the

USB home network interface, the number of payload bytes

transmitted, and the number and percentage of

transmitted packets in error.

Receive

The cumulative number of frames received over the USB

home network interface, the number of payload bytes

received, and the number and percentage of received

packets in error.

Item

Description

Management and Diagnostic Console

75

Local Network - Device List Page

The Local Network - Device List page displays information about each device in the local network.

Figure 31. MDC Local Network Device List Page

The following information is displayed.

•

Identity.

The name of the device. If the device does not have a name associated with it, the device IP

address is displayed.

•

Type.

The type of connection used by the device to connect to the local network: Ethernet, USB, or

Wireless.

•

MAC Address.

The hardware address used by the device.

•

IP Address.

The IP address used by the device.